|
Wow so Aero front and sides painted really about $800+shipping?
I got quoted for about 1500 just the front bumper:eek: |
Originally Posted by Skyline6mt
(Post 3410219)
Wow so Aero front and sides painted really about $800+shipping?
I got quoted for about 1500 just the front bumper:eek: |
for those of you that have installed the bumper,fog lights, and washer reservior on your own, approximately how long did it take you?
also, from reading earlier, it seems like the best size bolt to use to screw the fog lights to the bracket is the M6 x 15MM correct? |
Originally Posted by breftayka
(Post 3266321)
Apparently I am a total cheap skate because I just can't see myself paying $300 for a pair of fog lights. I have done some research and if everything is correct then I've found the fog lights pretty cheaper here.
NISSAN MURANO CUBE VERSA INFINITI FOG LIGHT PAIR (both right and left side use the same fog light) Fits year/model: 2007 2008 2009 NISSAN VERSA, 2009 NISSAN MURANO, 2009 NISSAN CUBE, 2006 2007 2008 2009 INFINITI FX35, 2006 2007 2008 INFINITI FX45, 20 This comes from part number B615089928 that is supposed to cross over to 261508990B which is superseded by 261508993B, which is the part number for our fogs. LOL. I will probably be the test subject on this, and will report back on the quality of the light. |
anyone one know if the injen windshield washer tank could be used instead of getting the 2011 reservoir for the aero front to fit?
|
Originally Posted by Liquid_G
(Post 3414793)
$109 for a pair that's pretty good, did u ever buy them to see if they fit the IPL/ Aero front bumper
|
is there a drop differences going from 08 sports to ipl?
|
Originally Posted by glabel98329
(Post 3415525)
Not sure if those ones fit, but the TYC 19-5719 and 19-5720 fit pretty good (based on reading through the thread, several others used them too). Finished my installation this weekend and had no problems whatsoever.
|
Did a search on this thread and didn't see anything. For those who painted the chrome ring, did you sand first? I'm pretty sure it will be a good idea so the paint will stick, but just making sure.
|
Originally Posted by Tek-C
(Post 3417288)
Did a search on this thread and didn't see anything. For those who painted the chrome ring, did you sand first? I'm pretty sure it will be a good idea so the paint will stick, but just making sure.
|
Is there an actual dealer part number for the Obsidian Black front bumper?
I have K6020-1NL0E and my dealer said this is an unpainted bumper. But in the threads here that is for the black bumper. Please help. Thanks. |
Originally Posted by Fezzik
(Post 3418524)
For people who do not want to splice into their fog light wire and just want to run the fogs on the bottom. You can get a H11 extender like this one
HID 9006 9005 H11 Wire harness Plug Ballast Connector | eBay |
Originally Posted by TVPostSound
(Post 3418562)
How will that work? The upper fogs are H1 (single spade)
|
This may be a noob question but does anyone know if the 2012 sedan bumper will fit on a 2009 coupe? I kinda prefer the look of the sedan bumper than the IPL.
|
Everything sure adds up.
Front Aero/IPL Bumper - $283 + 113 Shipped Lower Black IPL Grills - $138 Shipped IJDMTOY 3000K HIDS - $90 Shipped TYC Fogs - $135 Shipped Pig Tails - $20 Shipped which BTW are not needed as my HID Fog Kit did come with Pigtails already Aero/IPL Sides - 525 Shipped Aero/IPL Rear Bumper - 1,000 Shipped GRAND TOTAL = $2,304 for the Full Aero/IPL Kit :) Worth every penny. |
| All times are GMT -4. The time now is 12:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands