GREAT deal on some 19" Nismo S rims
10-27-2016, 11:40 AM
#16
The rears would be 17mm out for offset and 12mm out for the width increase, for a net 29mm out from the fronts, now the million dollar question~does that extra width in the barrel lip to the spokes exceed 29mm, and if so how much more?? This front wheel clearance looks like it's got decent room so maybe, just maybe??? Here's the best pics I've seen but no closeups of that rear.370Z Nismo S-Tune Wheels & Bodykit - Nissan 370Z Forum
As far as how those would fit on your X sedan, would be very aggressive for sure. Check the square fit thread, first couple pages Tbulsara & MylilG are running 10.5 +35/38s for a similar net fit as a 10+30, but they are running 275s, running 255s you'd gain 10mm wiggle room there~
https://www.myg37.com/forums/brakes-...post-here.html
Also Chinky Choy was running 9.5 +25 so he's in the same general fitment range on the last couple setups he posted on pg 1.
Last edited by blnewt; 10-27-2016 at 11:46 AM.
The following users liked this post:
ANMVQ (10-27-2016)
10-27-2016, 12:08 PM
#20
Registered Member
iTrader: (13)
Yeah, clearing the brakes could be an issue but those spokes take a sharp outward turn so The rears would be 17mm out for offset and 12mm out for the width increase, for a net 29mm out from the fronts, now the million dollar question~does that extra width in the barrel lip to the spokes exceed 29mm, and if so how much more?? This front wheel clearance looks like it's got decent room so maybe, just maybe??? Here's the best pics I've seen but no closeups of that rear.
370Z Nismo S-Tune Wheels & Bodykit - Nissan 370Z Forum
As far as how those would fit on your X sedan, would be very aggressive for sure. Check the square fit thread, first couple pages Tbulsara & MylilG are running 10.5 +35/38s for a similar net fit as a 10+30, but they are running 275s, running 255s you'd gain 10mm wiggle room there~
https://www.myg37.com/forums/brakes-...post-here.html
Also Chinky Choy was running 9.5 +25 so he's in the same general fitment range on the last couple setups he posted on pg 1.
The rears would be 17mm out for offset and 12mm out for the width increase, for a net 29mm out from the fronts, now the million dollar question~does that extra width in the barrel lip to the spokes exceed 29mm, and if so how much more?? This front wheel clearance looks like it's got decent room so maybe, just maybe??? Here's the best pics I've seen but no closeups of that rear.370Z Nismo S-Tune Wheels & Bodykit - Nissan 370Z Forum
As far as how those would fit on your X sedan, would be very aggressive for sure. Check the square fit thread, first couple pages Tbulsara & MylilG are running 10.5 +35/38s for a similar net fit as a 10+30, but they are running 275s, running 255s you'd gain 10mm wiggle room there~
https://www.myg37.com/forums/brakes-...post-here.html
Also Chinky Choy was running 9.5 +25 so he's in the same general fitment range on the last couple setups he posted on pg 1.
10-27-2016, 02:03 PM
#21
Registered User
Totally stock, these would make the perfect summer set. I just hope it doesn't look SUV status with them on, I can't do a drop since this is my commuter, rain sleet or snow.
10-27-2016, 02:17 PM
#22
Before we get too far ahead might want to call parts.com and confirm they they do indeed have these on hand, it seems to be a rare bird.
10-27-2016, 04:51 PM
#23
Registered Member
iTrader: (13)
^^^ Thanx man, I emailed them asking if they had them .. I run square now on my winters, 245/40. they are starggered rims 18*7.5 and 18*8.5. Stock G35S RWD rims. One of the best looking rims they made.
.. I run square now on my winters, 245/40. they are starggered rims 18*7.5 and 18*8.5. Stock G35S RWD rims. One of the best looking rims they made.
10-31-2016, 03:50 PM
#28
Registered Member
iTrader: (13)
Yea I saw that but the page says"
All Part inquires must be made through the form on this page to ensure accuracy and routing to the proper department." :/
I wish I knew whos car this was. I think they look good.
All Part inquires must be made through the form on this page to ensure accuracy and routing to the proper department." :/
I wish I knew whos car this was. I think they look good.
Last edited by ANMVQ; 10-31-2016 at 04:01 PM.
