Using 'thin' wheels' for track?

Old 05-29-2017, 06:53 AM
  #1  
nethole
Registered Member
Thread Starter
 
nethole's Avatar
 
Join Date: Dec 2010
Location: Williamsburg, VA
Posts: 249
Received 1 Like on 1 Post
Using 'thin' wheels' for track?

I have an extra set of 18x8.5 wheels (in addition to the 19x8.5 19x9 which are on the car now).

I can't use the 18x8.5 for autocross, and stay in street class (width's must be the same).
The width i less than I would want for 'stickier tires' for track use.

I've seen an number of 370Z folks use non-staggered wheels for their Z on the track, and they rotate. But, I've not seen anyone use only 8.5 inch width, always wider.

I'd really like a set of wheels suitable for track, I think I want a set of 18x9 (255/35 front) and 18x10.5 (285/30 rear). --- but I don't want to pay $1300+ for a set of wheels I'll only use at the track. I haven't seen any forsale opportunities for those sizes in the classified for a more 'economical price'.

Has anyone tried using 'thin' wheels for track purposes? Was it a pointless gesture? [tried to ask on370z site, but just can't get my account there 'validated', its like the admin -died- and the forum is just running itself with the people who already have an account)
Old 05-29-2017, 11:04 AM
  #2  
blnewt
Movin On!
iTrader: (13)
 
blnewt's Avatar
 
Join Date: Nov 2009
Posts: 24,877
Received 4,940 Likes on 4,174 Posts
IF you're not worried about knockoffs, you can get these in a 18x9.5 +30/35 and 18x10.5 +22 (would be real aggressive for a 285 though) for under $800
https://conceptzperformance.com/tech...sp_p_13378.php
And a list of 18x10.5s (so they should have 8.5to 9.5s in most of them too)
Unleashed Wheels Free Shipping | Free Lug Nuts | BC Racing | Ferrada Wheels | AG Wheels | VMR Wheels | Vorsteiner Wheels | Unleashed Wheels
Old 05-29-2017, 11:43 AM
  #3  
nethole
Registered Member
Thread Starter
 
nethole's Avatar
 
Join Date: Dec 2010
Location: Williamsburg, VA
Posts: 249
Received 1 Like on 1 Post
first link goes to a banjo bolt?
Old 05-29-2017, 12:10 PM
  #4  
blnewt
Movin On!
iTrader: (13)
 
blnewt's Avatar
 
Join Date: Nov 2009
Posts: 24,877
Received 4,940 Likes on 4,174 Posts
lol, sorry, been busy I guess
These are available in a 10.5 +40 but since they are a dish wheel they may have BBK clearance issues, but would allow you to run 285s and a 18x8.5 +38
https://www.aspiremotoring.com/produ...ack-polish-lip
Old 05-29-2017, 11:16 PM
  #5  
blnewt
Movin On!
iTrader: (13)
 
blnewt's Avatar
 
Join Date: Nov 2009
Posts: 24,877
Received 4,940 Likes on 4,174 Posts
Here's one more, again brake clearance is always a concern w/ cheaper cast wheels since the thicker spokes & barrels take up more room.
STR Wheels Rims 607 17 18 19 20 22 inch Gloss Black
Old 05-30-2017, 01:30 AM
  #6  
slartibartfast
Super Moderator
iTrader: (7)
 
slartibartfast's Avatar
 
Join Date: Oct 2014
Location: Houston, Tx
Posts: 6,084
Received 836 Likes on 715 Posts
The sedan S wheels with DOT legal race rubber would be a viable option. The extra traction more than makes up for the slightly narrower width. The taller sidewall won't be all that noticeable.
Old 05-30-2017, 03:30 PM
  #7  
bPChaos
Registered Member
 
bPChaos's Avatar
 
Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 363
Received 65 Likes on 55 Posts
Coupe? or Sedan?

And what's your class restrictions?

If you're in a coupe, try to find two sets of 370Z rear sport wheels. You can typically find them used, and they're the perfect width/offset (19x10 +30) for a 285 (the max tire width for the class that I run in down here).

Your class restrictions may limit the type of tire you can have (i.e., no R comps, need to be 200+ treadwear, etc), so you'd be limited to like a 245 width tire. While that's not terrible, our cars like more tire not only for grip, but heat and wear management. A wider tire has more mass and therefore can take way more heat before they overheat.


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:45 PM.