MyG37

MyG37 (https://www.myg37.com/forums/)
-   Wheels & Tires (https://www.myg37.com/forums/wheels-and-tires-307/)
-   -   Stance SC5 Rubbing (CAN'T DRIVE) (https://www.myg37.com/forums/wheels-and-tires/235410-stance-sc5-rubbing-cant-drive.html)

xeddyboi420x 05-08-2012 12:09 PM

Stance SC5 Rubbing (CAN'T DRIVE)
 
1 Attachment(s)
Hey guys,

Just bought some Stance SC5's from a member here and I'm now rubbing on every little bump (even worse while turning) on the rears. My shop maxed out my camber and I'm still rubbing.... any suggestions? Would stiff KW Coilovers do the trick?

I'm on:

20x10 +35 Fronts
20x10.5 +27 Rears

Hankook Evo's
255x35x20
275x30x20

Please help! My car cannot be driven at this time. :confused2:

P Casey 05-08-2012 12:14 PM

I had the same set up, you need to shave your bracket, have sways at stiff, -2.5-3.0 camber ,coilovers on stiff damping setting. Or switch tires to general 235/35 and 265/30.

xeddyboi420x 05-08-2012 12:25 PM

Can't switch tires, I just bought them! (2 of them from YOU!)

I also have no sways. I'm thinking of getting KW's installed...actually, I think i HAVE to get the KW Coilovers installed...

Do you think the KW's alone will solve the issue?

GET_SOME 05-08-2012 12:45 PM

to the op please dont take this as making fun of you but i dont think you did enough reserching before trying to run an agressive setup like this. im planning to run 10.5 all around and am still making sure i have everything i need to set it up right

xeddyboi420x 05-08-2012 12:49 PM

yup, you're right. i'm learning as i go and admit fault... but for now, i just need answer so any inputs would be great!

please share what you've learned

GET_SOME 05-08-2012 12:53 PM

well start off by letting us know what your current suspension setup is

xeddyboi420x 05-08-2012 12:58 PM

Tanabe NF210's Springs

.75" and 1" drops, seems lower tho after settling in... had them since 2008

JohnnysG 05-08-2012 01:01 PM


Originally Posted by GET_SOME (Post 3442143)
to the op please dont take this as making fun of you but i dont think you did enough reserching before trying to run an agressive setup like this. im planning to run 10.5 all around and am still making sure i have everything i need to set it up right

It's not that aggressive... lol


Originally Posted by xeddyboi420x (Post 3442173)
Tanabe NF210's Springs

.75" and 1" drops, seems lower tho after settling in... had them since 2008


You should probably sit lower so the wheels tuck in more so they don't rub against the fender.

You should also probably trim the fender bracket, that might be causing the problem. If you have KWV3's.... why are you waiting to install them?

xeddyboi420x 05-08-2012 01:06 PM

I don't have the KW's yet, but the shop and a friend is recommending me to get them. I just want to make sure that they can solve my problem before I spend $2k.

Maybe on highest stiffness they would solve my rubbing issue?

JohnnysG 05-08-2012 01:09 PM


Originally Posted by xeddyboi420x (Post 3442190)
I don't have the KW's yet, but the shop and a friend is recommending me to get them. I just want to make sure that they can solve my problem before I spend $2k.

Maybe on highest stiffness they would solve my rubbing issue?


If you can afford them get them, they receive great reviews. Any coilover would practically do the trick though.

xeddyboi420x 05-08-2012 01:13 PM


Originally Posted by JohnnysG (Post 3442193)
If you can afford them get them, they receive great reviews. Any coilover would practically do the trick though.

nice, that's what i like to hear.... at this point, i just want the problem solved.

GET_SOME 05-08-2012 01:15 PM

yeah your biggest issue is your simply not low enough. and unless your dead set on getting kw3 id look at companies like stance and bc racing for coilovers.. im running ksports and they are great coilovers. look at some of the guys running 10.5 in front and most of the cars are pretty low. camber is your friend for this type of setup.

JohnnysG 05-08-2012 01:24 PM

I'm either getting Megan coils or Stance ... haven't decided, Stance is almost $400 more, so I'll see.

xeddyboi420x 05-08-2012 01:29 PM

my shop works on a lot of m3's and recommends KW's

P Casey 05-08-2012 01:43 PM

No kw won't solve ur issues. The tire set up is aggressive with those offsets


All times are GMT -4. The time now is 11:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands