potmilkz

Category: Wheels & Tires
Price: $2000
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Sedan, 2008-2009 G37 Coupe, Other Model G's
Location (State/Prov): AR
Item Condition: Used

FIRST 2000 CASH GETS IT.

Had these rims for about a year, took them off 1 month ago, went back to stock.



as you all know the famous TE-37
(FR) 19x8.5 +22 [ 2 brand new falken fk452 about 95% thread] 245/35/19
(RR)19x9.5 +12 [ 2 used up nitto nt555 rear tires) 275/35/19 (HAS ABOUT 3 INCH REAR LIP)
+ CENTER CAPS
WILL NOT PART OUT RIMS OR TIRES.

One of the rims have scuff its 1 of the rear rims that has a curb thats about 1/3 of the lip of the rim..

i think its this one.



and some of the rims has little chips..

the rear tires are ok to drive on, but will probably have to change in like 1000 miles..

heres the rest of the pictures..




REAR











FRONT












no shipping LOCAL PICK UP ONLY

THIS IS HOW IT SAT ON MY CAR







PLEASE CALL ME AT 626-863-0054 OR TEXT IS BETTER.

CALL ME ANYTIME. IM LOCATED IN ARCADIA, TEMPLE CITY, ROSEMEAD AREA.

ABSOLUTELY NO RESERVATION, FIRST ONE TO SHOW CASH GETS IT..


PRICE WAS LOWERED FROM 2300 TO 2000

DanMardik

iTrader: (7)

Offsets to aggressive. Will not fit the G37

potmilkz

really... it fits a g35...

DanMardik

iTrader: (7)

But it wont fit a G37.. Sorry

G37Sam

What do you mean it won't fit? I've seen people fit negative offsets on the G37 so trust me, anything can be made to fit lol

potmilkz

haha serious... i was like wtf.. if it can be done on a g35 im certian it can be done on a g37

TomieG

iTrader: (5)

Front will work. Rears will poke. Might need to do some cutting of fender liner. But anything will fit, if you make it fit.

potmilkz

well obviously you dont expect it to fit on stock or anything like that.. you might have to do some suspension work, probably go camber but it will fit..

DanMardik

iTrader: (7)

If you want it to look like this.

potmilkz

LOL.. i guess he doesnt know what hes talking about..

dont really know what your thinking since sedans run this set up too...

is250 - 350 run this as well..

DanMardik

iTrader: (7)

Hey now..

If anyone is running 12+ offset in the rear on a 9.5" wheel, I would really like to see that. I'm sure you can make it fit, but you're really going to have to play with camber, and I don't mean mild camber adjustment.

My only point is that anyone wanting to run a typical set up will not be able to pull this off.

DanMardik

iTrader: (7)

This example below is with +22 offset all around... granted I don't know the width of these wheels, You really think +12 would fit??

TomieG

iTrader: (5)

^Im running +13 in the rear right now. Had to do significant fender work and run -4 degrees of camber. Wheels are 10.5

DanMardik

iTrader: (7)

There you go.

G37Sam

OP's rears are 9.5" wide