kevinmward

iTrader: (1)

Category: Engine - Power Adders
Price: $2500
Private or Vendor Listing: Private Listing
Location (State/Prov): NY
Item Condition: Used

Long story short, I bought a GTM kit used from a friend to put in my g37, kit was from a RWD was going to modify them to fit my AWD. I ended up in the process of all this buying pistons rods so forth on and building my motor and pretty much everything else and these were just not gonna support my HP goals, I'm now going twin 6266's. So Had these sitting in my garage for the longest,
Anyone wanna go boost cheap, they are got a set of GT28RS(Stage 2) with 82 housings. and GTM stage 1 manifolds.. Also have a pair of .82 Tial v band housings for them if you want to go v band route.
I'm at work I can get pics up later. I know thread requires a price but like I said just sitting in my garage haven't really put to much thought into it, another forum member just told me to put this up because everyone wants to go boost and here's a chance to start for cheap.

the Vband manifolds ill let go for 400 for the pair, they sell for 4-500 a piece online. (Brand New)

Id prefer local, its just easier that way when dealing with turbos and what not you can look at it and inspect everything first for peace of mind. I'm in NY Westchester.

Lets get more boosted 37's





$2500 for Pair of 2871's and GTM V1 Manifolds.
$400 for the Pair of tial V band housings

Lt8Che

iTrader: (6)

Post them pics up!

kevinmward

iTrader: (1)

O yea, a few questions I got via pm, not really interested in trades unless its for a Haltech Elite 2500/ a VQ37 bottom with 35 heads/ Cams + cash on top.
thanks

Patton6964

iTrader: (2)

So what does this kit need to work? Is this just plug and play? I'd be extremely interested if its just plug and go!!!

kevinmward

iTrader: (1)

lol no not for 2k lol, its just the turbos and manifolds. You need a the rest of it to work.
Id prefer to sell to someone who is familiar with boosting cars that knows what they're getting into lol. Just to give you/ anyone whos kinda wondering what they need(I don't mind walking you through it)

Off the top you would need:
1) Plumbing fab'd(Intercooler piping, exhaust from downpipe back, intakes)
2) Intercooler
3)Injectors
4)Flash (ecutek/Uprev)
5)Lines( Oil Return Feed/ Water lines)
6)Fuel Pump
8) BOV/Waste gates(I If you don't want to use the internal gates)

that would get you pretty much going think I covered everything.

The most expenisve in my eyes in plumbing.
The rest that stuff could be sourced for under 2k.
Which beats the 11k price tag GTM wants lol

RMB5190

iTrader: (2)

Seriously...anyone looking to boost can scoop these up and take them to the local perf. shop and have them use them in a custom build. Not a bad start-up

kevinmward

iTrader: (1)