OEM Akebono brakes and lines
 

Akebono/Infiniti big brakes off a 2013 6MT Sport. Includes all OEM lines - all you'll need is to hook them up to the hardline on the wheel well. Includes used OEM pads and hardware with usable life left.

Asking $600 + shipping; since the boxes are 25 and 12 pounds each you can calculate your own shipping: my zip is 29418.


https://cimg4.ibsrv.net/gimg/www.myg...c2919b15d2.jpg
https://cimg5.ibsrv.net/gimg/www.myg...fe7bfbd2d5.jpg
https://cimg6.ibsrv.net/gimg/www.myg...89a2d8e39f.jpg
https://cimg7.ibsrv.net/gimg/www.myg...cf067ed2b2.jpg
https://cimg0.ibsrv.net/gimg/www.myg...09c08be24b.jpg
https://cimg8.ibsrv.net/gimg/www.myg...e5170dd793.jpg
https://cimg9.ibsrv.net/gimg/www.myg...d7bdb61ba5.jpg

These are originally silver, were painted black over that when I got them, and I painted them red. I'll throw in the can of caliper paint if you want - they should be cleaned before install, you can paint them red again or whatever. As far as I can tell, the original silver finish is still in OK shape under the black.

Well, you're sort of right.

They sell remanufactured - these are OEM. Amazon has those for a little over $500. They do not include lines, or pads.

Nevertheless, the going rate on here seems to be about 600, so that is what these are priced at.

@rotarymike I may be interested, will report back.

Bear in mind that if you're converting from the smaller brakes, you'll need rotors, and may need different caliper-knuckle bolts.

@Aeroneer1 if you're converting from base model brakes we can talk about OEM rotors too. They'd need to be minimally turned, but Advance and usually O'Reilly's do that for $10 each. I do NOT have the caliper-knuckle bolts, so if those are different you'd need to source them from Nissan.

Shipping would be the big SOB, I wouldn't ask too much $ for the 4 rotors.

rotarymike I'm interested in the brakes and I just moved to Charleston!

Sent a PM.

These are still available. Say $500 + shipping, and I'll include the rotors.

Are these only the fronts?

If you wouldn't mind, please text me at 508-298-8066. I am much more likely to see your message in a timely fashion through text than through the forum. Thank you.

Will contact that guy directly, but for the rest of the room it is for front and rear.

I am interested PM me please

Update after looking over the rotors for a previous buyer: Not sure if they're worth it to ship. One of the rears has dings from being beaten off the hub that I'm not sure would machine out with having them turned. Also, the box is 100# and I can't do free shipping on that LOL like RCA Garage or Amazon could - you might be better with new stock rotors from one of them or RockAuto with free shipping.

They *are* available for pickup in Charleston, if you want them. Otherwise they're weights for my rucking backpack.

I am interested in the calipers w/ lines only. Are they still available to be shipped?

That guy is PM'd.

FWIW, shipping info is:
Shipping address 29418
1 box 14x17x8 30 pounds
1 box 15x22x8 17 pounds

It's pricey, even via UPS Grounds.