Duck bill rear trunk
#51
Former Sponsor
Thread Starter
Join Date: Apr 2009
Location: Southern California
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
camera hole will be cut out upon request, we won't leave out the guys who have back up camera.
Last edited by motor-lux; 10-23-2009 at 02:36 AM.
#56
Former Sponsor
Thread Starter
Join Date: Apr 2009
Location: Southern California
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Added some day time pictures.
We are going to set up pre-order once we become vendor on the board (in about a week), but we will only take certain amount of guys for the pre-order. As far as the price goes, it will be around $800-1k for the vacuum process dry carbon trunk. Our goal is to build a part that really save weight, strong and fit very close to OEM.
We are going to set up pre-order once we become vendor on the board (in about a week), but we will only take certain amount of guys for the pre-order. As far as the price goes, it will be around $800-1k for the vacuum process dry carbon trunk. Our goal is to build a part that really save weight, strong and fit very close to OEM.
#60
Former Sponsor
Thread Starter
Join Date: Apr 2009
Location: Southern California
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
please note, there are trunk rang from few thousand dollar to few hundred dollar, the reason is the process and material each product use, we can also build a cf trunk cost $600 but that's not the part we are trying to make.