FS: License Plate LED Upgrade! Cheap Mod!
11-16-2011, 08:04 PM
#16
Former Sponsor
Thread Starter
iTrader: (11)
^ That is white. Please bear in mind that different lighting conditions make it difficult to accurate capture the color of lights in pictures. Our LEDs are 6000K white.
The 1-5050 SMD has one SMD on it, and the 2-5050 SMD has two. It's a brighter bulb. Thanks!
The 1-5050 SMD has one SMD on it, and the 2-5050 SMD has two. It's a brighter bulb. Thanks!
11-21-2011, 11:51 PM
#17
Hello,
I bought a set of bulbs for license plate. The installation wasn't too hard, but I found the right hand side a bit harder to reach you might have to remove the license plate to work on.
but i found one of the bulbs I got from Diode dynamics is a little bit too loose, the LED touches but drops so I have to partially tape it to secure. maybe just my shipment isn't well fit , a defect maybe.
I bought a set of bulbs for license plate. The installation wasn't too hard, but I found the right hand side a bit harder to reach you might have to remove the license plate to work on.
but i found one of the bulbs I got from Diode dynamics is a little bit too loose, the LED touches but drops so I have to partially tape it to secure. maybe just my shipment isn't well fit , a defect maybe.
11-21-2011, 11:57 PM
#18
Former Sponsor
Thread Starter
iTrader: (11)
Please adjust the pins on the bulb itself, or tighten the socket a bit, to get a snug fit if needed. Sometimes the socket becomes loose when you remove the old bulb. Thanks!
02-06-2012, 11:12 PM
#24
What are the differences between the various stages?
When I clicked on the different stages in your initial post, the links all went to the same page, or what looked like the same page.
I just wanna make sure I understand what I'm choosing before I place my order. Thanks!
When I clicked on the different stages in your initial post, the links all went to the same page, or what looked like the same page.
I just wanna make sure I understand what I'm choosing before I place my order. Thanks!
02-07-2012, 01:54 AM
#25
What are the differences between the various stages?
When I clicked on the different stages in your initial post, the links all went to the same page, or what looked like the same page.
I just wanna make sure I understand what I'm choosing before I place my order. Thanks!
When I clicked on the different stages in your initial post, the links all went to the same page, or what looked like the same page.
I just wanna make sure I understand what I'm choosing before I place my order. Thanks!
Stage 1 = OEM look but cleaner.
Stage 2 = Nice and more white but nothing too outlandish.
Stage 3 = Hey everyone, look at my license plate (bright)!
Someone correct me if I'm wrong.
I just bought the stage 2's and will be installing them soon. I was worried that the stage 3's might be too bright so if anyone wants to chime in about those go right ahead. In any matter, the vendor Diode who sales these shipped them out really quick and have been good with feed back. Hopefully these last a long time.
02-07-2012, 12:45 PM
#26
From my understanding
Stage 1 = OEM look but cleaner.
Stage 2 = Nice and more white but nothing too outlandish.
Stage 3 = Hey everyone, look at my license plate (bright)!
Someone correct me if I'm wrong.
I just bought the stage 2's and will be installing them soon. I was worried that the stage 3's might be too bright so if anyone wants to chime in about those go right ahead. In any matter, the vendor Diode who sales these shipped them out really quick and have been good with feed back. Hopefully these last a long time.
Stage 1 = OEM look but cleaner.
Stage 2 = Nice and more white but nothing too outlandish.
Stage 3 = Hey everyone, look at my license plate (bright)!
Someone correct me if I'm wrong.
I just bought the stage 2's and will be installing them soon. I was worried that the stage 3's might be too bright so if anyone wants to chime in about those go right ahead. In any matter, the vendor Diode who sales these shipped them out really quick and have been good with feed back. Hopefully these last a long time.
And I opted for the "look at me" stage 3 lights as you so eloquently put it. No sense trying to blend in with the crowd.
