tite_tite

Hello,

Awhile back, i had my front window broken into & was replaced. The window place vacuum the broken glass as much as possible.

Today, i was doing some cleaning in my car & the driver seats was not moving forward & back as usual. I am suspecting there are some broken glass caught up underneath.

There are (4) 14mm screws that needs to be removed for the front seats to come off. My question is, can I just remove the 2 from the back & tilt the seats a little toward the front to vacuum the broken glass from the rails or i need to remove the whole seat out of the car?

Thanks in advance.

PNW_IPL

iTrader: (5)

Try it. If not remove the other two. Probably took you more time to make the post than to remove the seat.

tite_tite

We have a problem!!
please help.

i remove the 2 screws & lift the seat up..as i was adjusting the seats it is out align..

Cant get 2 the 2 screws in the front
any suggestion. Thnx

PNW_IPL

iTrader: (5)

Try to move the seat backward to be able to get at the front bolts. May have to use a box wrench at this point.

tite_tite

thanks for the response. was able to use the box wrench. my seats motor actually went out. will ask for assistance on different thread. thanks agian.

PNW_IPL

iTrader: (5)

I see. Sorry to hear. Goodluck.