Exhaust Project
 

Going to Install a Tomei Expreme ti (370z) onto my sedan. I will try to order it in the next few days and will update this thread with more info.

shouldn' you do the 370z tomei based on bends?


https://cimg4.ibsrv.net/gimg/www.myg...67c001dad8.jpg
https://cimg6.ibsrv.net/gimg/www.myg...e1488860f9.jpg
https://cimg7.ibsrv.net/gimg/www.myg...e012f29700.jpg

I feel like 350z version may hit the plastic near bumper idk though.

I've seen it done with the 370z Tomei. JotechMotorsports has done it to his sedan. I made an error, I meant to say 370z

Gotcha. Ive too seen 370z version on sedan. Let us know what length extension is needed so we can sticky

Will do. I want to order asap to test fit it.

who is making your extension

Nice. Post up a clip when have it on.

I thought about doing this, but with two, so it wouldn't be so loud.

motordyne resonated xyz should do the trick. And while making extension have it include resonated. Problem solved

It'll depend on how far I need to extend. Z1 makes extentions in 7" and 10". If it is some combination of that I will go with that. If not, I will take it to my muffler shop.

that would be very expensive

I did this with a 3inch single exit from ISR made for a 370Z.

It needed a 12 inch extension, which I obtained from topspeed. The exhaust also had to essentially be cut, twisted, and re-welded to fit (but nothing crazy).

that is something crazy considering the tomei exhaust fits with and extension and without cutting and rewelding.......