What did you do to your Sedan today?
#4036
Registered User
I feel fairly certain there are options out there. In fact, I feel like there was a really decent looking, low-cost one that is basically like cut your own type material or something. This is all really loose as I live in MN and the splitter would never make through winter with me behind the wheel.
Maybe someone else can chime in.
Maybe someone else can chime in.
Rgthirty5 on Instagram got his from Amazon and it’s a BMW splitter:
The following users liked this post:
Speedylifsavr (12-02-2017)
#4039
Administrator
iTrader: (8)
Are you keeping your non-sport brakes? Then avoid wide open 5-spokes, or any deep lip design that showcases the brakes. On the upside, you won't have to worry about caliper clearance.
The following users liked this post:
Speedylifsavr (12-02-2017)
#4041
Didn't do it today, but here are a few pictures from my installed TBW aluminum undertray. Sorry Rochester for the late post. The build quality and fitment on this product are spot on and it gives a little more ground clearance for the awd models. Haven't done an oil change yet but it looks like there is lots of space to reach the filter by just opening the oil pan door, the drain plug looks a little close to the undertray but it might be ok. Don't mind the dirty underside of the car
Stock
Stock
The following users liked this post:
Rochester (12-02-2017)
#4042
Administrator
iTrader: (8)
Oh, that's nice! Particularly in gloss black. Is that powdercoat? Did you buy their bolts & clips, too?
What's going on in that last pic, near the filter panel?
What's going on in that last pic, near the filter panel?
#4043
Registered Member
My Diff Bushings and Subframe Bushing Collars Came in. I don't know how much of a difference the Collars will make, but the Bushings look great. I look forward to having them installed. I am getting an alignment too, I wonder if the car will need one after the diff is taken out.
I am told I need a Guibo, also known as the flex disk that is connected to the driveshaft. Does anyone know where I can get one?
I also cleaned my maf, it feels a bit more responsive. I plan on cleaning my throttle bodies as well.
I am told I need a Guibo, also known as the flex disk that is connected to the driveshaft. Does anyone know where I can get one?
I also cleaned my maf, it feels a bit more responsive. I plan on cleaning my throttle bodies as well.
Last edited by ezbme; 12-02-2017 at 05:52 PM.
#4044
Yes it's powder coated gloss black and yes I bought the bolts and clips too. I changed all the bolts but I didn't change all the clips because some were hard to reach. Honestly I'm not sure what's going on in that last pic. According to the pic it looks like the paint was bubbling up but i only noticed that when I looked at the pics myself. While installing and the pre check of the item everything looked good. Maybe some dirt or weird reflection? I have to check that once I'm under the car again
The following users liked this post:
blnewt (12-03-2017)
#4050
Administrator
iTrader: (8)
Yes it's powder coated gloss black and yes I bought the bolts and clips too. I changed all the bolts but I didn't change all the clips because some were hard to reach. Honestly I'm not sure what's going on in that last pic. According to the pic it looks like the paint was bubbling up but i only noticed that when I looked at the pics myself. While installing and the pre check of the item everything looked good. Maybe some dirt or weird reflection? I have to check that once I'm under the car again
The bolts look like zinc plated or SS... which? Was black available? When I get around to getting this piece, I was thinking of getting Ti.