Need Photo of 2012 sedan oem spoiler
#16
Administrator
iTrader: (8)
Here's one from a down low angle.
As much as I like the spoiler, the trunk release button is a really poor design. Off-center and chrome... WTF is up with that? They could have at least make it a little more stealthy.
Anyway, the big square thing, that's the backup camera lens.
As much as I like the spoiler, the trunk release button is a really poor design. Off-center and chrome... WTF is up with that? They could have at least make it a little more stealthy.
Anyway, the big square thing, that's the backup camera lens.
#17
Administrator
iTrader: (8)
Pics of the spoiler, here's another
And one more, with profile perspective:
And one more, with profile perspective:
The following users liked this post:
Coltrane1 (03-22-2017)
#19
Registered User
Thread Starter
Join Date: Apr 2012
Location: Seattle
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Again thanks for all the pics. I ordered mine from DiscountInfiniti parts. Installed it today and the pics of install was helpful. The templates to drill holes were spot on. Very doable project. Glad its over.
#20
Registered User
I got my spoiler from discountparts also. After doing some detective work, i ordered the accessories part # k6030-jk77a. Which was around 30 bucks less then #1nf7a from collision catalog. Exact same spoiler and I love it. I did not drill the outside holes and spoiler is very secure.
#21
Registered User
Thread Starter
Join Date: Apr 2012
Location: Seattle
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
The only negative comment I have is the open gaps where the camera goes in and trunk button. Lots of water can get in there during washing. Does everyone else see that?
#22
Registered User
Yeah, I noticed that too. I tried to put the rubber piece from the chrome spoiler but didn't stay in place and really didn't feel like messing with it any longer. I guess I'll have to be cautions when washing the car. Maybe cover the camera up with something
#23
Administrator
iTrader: (8)
It's surely a minor complaint when considering the car in its entirety. But I still notice the detail fail nonetheless.
#25
Administrator
iTrader: (8)
Really? That's (a little) comforting knowing it's a common manufacturer defect.
Understood. On the other hand, I notice details, with both appreciation for the finer ones, and disappointment when they're sloppy.
Understood. On the other hand, I notice details, with both appreciation for the finer ones, and disappointment when they're sloppy.
#26
Registered User
Thread Starter
Join Date: Apr 2012
Location: Seattle
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Rochester, my trunk button is pretty much centered. My camera is centered but there are air gaps on all 4 sides. From you photo, yours looks centered to, but are you saying there is no air gap where the camera is? On the chrome piece there is a rubber type square that fills the gaps.
#27
Administrator
iTrader: (8)
Rochester, my trunk button is pretty much centered. My camera is centered but there are air gaps on all 4 sides. From you photo, yours looks centered to, but are you saying there is no air gap where the camera is? On the chrome piece there is a rubber type square that fills the gaps.
[edit] You're right. On mine, the camera is tight bottom/left, but with a gap top/right.
(sigh)
#28
Movin On!
iTrader: (13)
Not in my camera. But the trunk release button fitment is absolutely horrible on my car. It's slammed to the left, with a 1/8" gap on the right. I'm none too happy about that. While on the topic, I'm none to happy with having a conspicuously silver button offset from the middle of the trunk. It looks dumb.
It's surely a minor complaint when considering the car in its entirety. But I still notice the detail fail nonetheless.
It's surely a minor complaint when considering the car in its entirety. But I still notice the detail fail nonetheless.
BTW, it really does seem like they could've found a better place for the camera