Dan G37

I was just wondering If I need to replace my belt at all or if its normal.

Video of cold start belt squeel-
Belt after the car being warm for awhile-
Belt inspection
I started to notice that my belt starts to squeel when I start it while cold. Was wondering if I need to replace the belt or not.

slartibartfast

iTrader: (7)

Start the car then rub a bar of soap against the sides of the belt.

Dan G37

Will that actually help stop the squeeling? Also does the belt still look good?

slartibartfast

iTrader: (7)

The belt looks okay but looks can be deceiving. And yes, the soap trick works. It's a very old-school way of delaying the inevitable.

Surfnazi

The soap let's you know if it's the belt or tensioner I'd just replace both

JSolo

iTrader: (14)

If you go anywhere near the belt with the car running, be mindful of your fingers.

Dan G37

How do you know which to replace?

slartibartfast

iTrader: (7)

If the squealing stops after you apply soap, then the belt is bad. If not, then it's the tensioner.

RMB5190

iTrader: (2)

Should be an indicator on the tensioner that is somewhat of a tell tale if it's time to replace the belt.



Link to relevant thread:

https://www.myg37.com/forums/engine-...placement.html

2011-G

I went thru the same thing few months back - squeeling loud at cold starts and then it would be quiet when the engine gets warmed up. Changed my belt since it was over due but it didn't help - Next was Power steering Pump - Replaced that with no luck - The squeeling noise wasnt as bad after I replaced my pump - flushed my steering fluid and radiator fluid the same day but still no luck with the squeeling noise.

..............

and then one day it just automatically went away - Its been 3 weeks I havent heard that noise lolol

Not sure what this is but all my friends with the G37 made the same noise for few days when it was extremely cold.

Not sure what t F its all about

Surfnazi

Belt tensioner

Dan G37

Do you have a DIY for belt tensioner and belt change?

Dan G37

I haven't even replaced the belt yet but the noise has stopped ever since it got warmer out. I'm still going to replace the belt. Did you change the belt yourself?

Dan G37

Has anyone else looked into the GATES K070795RPM belt? https://www.carid.com/gates/racing-m...070795rpm.html

Its more heat resistant also with the strength to transmit load more accurately with less vibration.

Does anyone know if its worth the extra 30$? Wondering if any other members here got the RPM belt from Gates.

Entcee

iTrader: (3)

^ Interesting! might use that belt when I change it next. I just replaced mine with the regular Gates belt.

On a side note, anyone wanting to replace the smooth idler pulley will have a hard time finding the correct part. The bolt on the Gates smooth pulley is too small. Looks like the other brands follow suite. OEM and the one from Z1 might be the only correct ones. Ended up using the factory washers, spacers, and bolt. The grooved pulleys from gates were fine.