Installed Megan Racing Axleback- In Love
After failing to remove a rusted on nut (I didn't have any PB Blaster :52:), I bent the exhaust bolt in the process and wasn't able to remove it to install the new Megan Racing exhaust (4 hours later I gave up).
Drove my muffler-less car over to Henry's Muffler Shop in Raleigh, NC and they put it up on a lift, hammered out the bolt within minutes and had my exhaust installed within 20 minutes. Great guys! One of the employees was explaining a few things as they were doing it and I learned a good bit. https://cimg6.ibsrv.net/gimg/www.myg...6bd3843cb5.jpg First impression- It's very tame. https://cimg0.ibsrv.net/gimg/www.myg...b963c9bd1f.jpg And I'm coming from stock -> Manzo -> stock (again) -> Megan Racing. The MR axleback seems so much more refined and of higher quality (obviously) than both the Manzo and stock mufflers. It's hardly noticeable at a warm idle, but once you get past 3,500 RPMs it opens up with a deep growl :DOMO: Couldn't be happier :D VIDEO: |
Sound clip or it didn't happen :D
|
Glad it worked out and you are back to a happy place, looks good too!
|
I installed a Megan exhaust for about 2 weeks. Liked the sound, but here's my findings:
* Everyone has their own taste * Fit and finish on the Megan was spectacular. It's a work of art. * The tone of the exhaust changes from a precision-tenor to a bass-y barritone * There was a distinct drone with my 7AT at 2K RPMs. Every other RPM didnt have it, only at 2K RPMs * Ended up selling it to a guy with a 6 speed manual. For some reason it sounded great on that car but not mine (due to the drone). Glad yours is working out. Maybe its me being 53 that doesnt tolerate drone like a younger guy :-D |
Originally Posted by petemo94
(Post 4084297)
I installed a Megan exhaust for about 2 weeks. Liked the sound, but here's my findings:
* Everyone has their own taste * Fit and finish on the Megan was spectacular. It's a work of art. * The tone of the exhaust changes from a precision-tenor to a bass-y barritone * There was a distinct drone with my 7AT at 2K RPMs. Every other RPM didnt have it, only at 2K RPMs * Ended up selling it to a guy with a 6 speed manual. For some reason it sounded great on that car but not mine (due to the drone). Glad yours is working out. Maybe its me being 53 that doesnt tolerate drone like a younger guy :-D The MR exhaust has no drone compared to the Manzo.. It could be the difference in cars. Or your age 😉 haha. You've got about 30 years on me. |
Originally Posted by Kris9884
(Post 4084202)
Sound clip or it didn't happen :D
Originally Posted by petemo94
(Post 4084297)
I installed a Megan exhaust for about 2 weeks. Liked the sound, but here's my findings:
* Everyone has their own taste * Fit and finish on the Megan was spectacular. It's a work of art. * The tone of the exhaust changes from a precision-tenor to a bass-y barritone * There was a distinct drone with my 7AT at 2K RPMs. Every other RPM didnt have it, only at 2K RPMs * Ended up selling it to a guy with a 6 speed manual. For some reason it sounded great on that car but not mine (due to the drone). Glad yours is working out. Maybe its me being 53 that doesnt tolerate drone like a younger guy :-D |
Originally Posted by rolltidealumni
(Post 4084686)
Cold-start sound clip! https://www.youtube.com/watch?v=9FXT...ature=youtu.be
Think they are on to ya! |
Sounds good.. and good to hear about Henry's. They've been around for a long time.
|
Sounds great! I need to make a cold start video of my car in the garage. It is ridiculously loud at cold start in the morning, my neighbors would really hate me if I drove it on a daily basis.
|
Hey Pete.
Originally Posted by petemo94
(Post 4084297)
* Ended up selling it to a guy with a 6 speed manual. For some reason it sounded great on that car but not mine (due to the drone).
Glad yours is working out. Maybe its me being 53 that doesnt tolerate drone like a younger guy :-D Not ridiculously loud at all, I fire mine up at 4:30am and haven't had any complaints. |
Wanted to stop by and say thanks for the sound clip. Sounds great.
Also Roll Tide Roll. Gonna get another national championship this year. (Current MechE student) |
Great to hear from you Russ. Glad the MR exhaust is working out. I'm contemplating opening mine up and cutting out a section of the muffler on the inside. I recently posted an article on it. Good luck with future upgrades as well! 👍
Originally Posted by Hooligan Russ
(Post 4085365)
I'm that guy. I love the sound. Pete's right, its a nice refined tone. Its a perfect gateway upgrade... maybe add some high flow cats and CAI in the future.
Not ridiculously loud at all, I fire mine up at 4:30am and haven't had any complaints. |
Originally Posted by C-G37
(Post 4085422)
Wanted to stop by and say thanks for the sound clip. Sounds great.
Also Roll Tide Roll. Gonna get another national championship this year. (Current MechE student) Roll Tide!! |
Uploaded a revving clip :coolio:
|
Sounds very tuned, love it, kinda makes me wanna remove my test pipes and go back lol. Only kinda though...
|
All times are GMT -4. The time now is 06:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands