MyG37

MyG37 (https://www.myg37.com/forums/)
-   Engine, Drivetrain & Forced-Induction (https://www.myg37.com/forums/engine-drivetrain-and-forced-induction-309/)
-   -   Help Check Eng Lights wont turn off... help! (https://www.myg37.com/forums/engine-drivetrain-and-forced-induction/287719-check-eng-lights-wont-turn-off-help.html)

G37b 04-15-2018 05:03 PM
Check Eng Lights wont turn off... help!
 
My mechanic is hooking up his scanner to the OBD and trying to remove the code which is a 010 code... and he is resetting the code and canceling out the 010 code and the engine lights are NOT turning off.. ABS, AWD, traction, check engine are all on and WONT TURN OFF... how in the heck can we get these codes off??? this is the 2nd mechanic to try and turn off the codes... uggh. :mad:

thx,

GdaddyNY 04-15-2018 06:31 PM
You probably have a P0010 code for bank 1 camshaft position. The code will not erase if the problem is not corrected. Possible issues:
Engine timing out of sync, Engine oil sludge or lack of oil or oil pressure. Worn timing components (chains, gears, guides)
Crankshaft or camshaft sensor malfunctions
Wiring damage
ECM software out of datA ECM internal damage

G37b 04-15-2018 08:32 PM
well that doesnt sound good...

doublea88 04-16-2018 10:11 AM
I also have that code and was easily able to clear it. You have to be sure to turn the engine off when you clear it. I also started a thread about replacing the solenoid as i had troubling trying to get it out, otherwise it's a simple remove and replace.

Vizard_87 04-16-2018 10:25 AM
maybe you should try and fix the problem and it will go away?

G37b 04-16-2018 11:05 AM
Originally Posted by Vizard_87 (Post 4193444)
maybe you should try and fix the problem and it will go away?
hey thats a BIG help thx... what do you think i am trying to do? ignore the problem?

G37b 04-16-2018 11:06 AM
Originally Posted by doublea88 (Post 4193442)
I also have that code and was easily able to clear it. You have to be sure to turn the engine off when you clear it. I also started a thread about replacing the solenoid as i had troubling trying to get it out, otherwise it's a simple remove and replace.
when he reset the codes the car was "on" but not running.... then we turned the car off. cranked engine and they were all still on. nothing went out. are you saying car should be "off" when codes are reset? or just turned off once reset? thx

slartibartfast 04-16-2018 03:28 PM
Stop worrying about the CEL until AFTER you've replaced the solenoid or whatever.

G37b 04-16-2018 05:33 PM
Originally Posted by slartibartfast (Post 4193497)
Stop worrying about the CEL until AFTER you've replaced the solenoid or whatever.
plz ref what i said to vizard above...

Vizard_87 04-16-2018 05:41 PM
Sounds like you are trying to erase the code without actually trying to fix it.... :confused2::dunno:

G37b 04-16-2018 05:45 PM
well that would be incorrect

slartibartfast 04-16-2018 11:03 PM
I thought the same as Vizard, thus my comment. You're not communicating clearly as to what's going on.


All times are GMT -4. The time now is 11:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands