MyG37 - PMTW_IPL's build

MyG37 (https://www.myg37.com/forums/)

- Build Threads (https://www.myg37.com/forums/build-threads-399/)

- - PMTW_IPL's build (https://www.myg37.com/forums/build-threads/292360-pmtw_ipls-build.html)

PMTW_IPL's build

Hey guys, I decided to post my build and contribute to the forums. A little background on my G; it's a 2012 IPL bought from the first owner with 96k miles on 12/27/17. As of now (4/14/19) it's sitting at 110,836 miles. It has the graphite shadow paint with the black red-stitched seats. I recently wrapped it in 3M Gloss Cosmic Blue and I'm in love with the color! One of the best decisions I've made on the car. The plan for this build is to push the limit on how much power I can make before going FI (if I still want to). Enjoy this build and please feel free to comment, make suggestions, and voice your opinion. I'm completely fine with criticism as long as it makes sense. Follow me on my IG: PMTW_IPL to see more pictures and keep up with my build!

MODS as of 4/14/19

Exterior:
3M Gloss Cosmic Blue Vinyl Wrap with Gloss Black Roof
VIS Racing AMS Carbon Fiber Hood (Outcast Garage)
Carbon Fiber Spoiler (eBay)
Hydrodip Carbon Fiber Side Mirror Caps (@mainecoastcustoms)

Interior:
Carbon Fiber Steering Wheel (@carbonfiberelement)
Carbon Fiber Shift Knob (@carbonfiberelement)
Hydrodip Carbon Fiber Foglight Bezel (@mainecoastcustoms)
Hydrodip Carbon Fiber A-Pillars (@mainecoastcustoms)
Morimoto XB HID D2S (6500k)
City Light 194 PHILIPS LED (6000k)
Diode Dynamics Foglight H11 LED
Full Interior LED Conversion (dome lights, door puddle lights, and trunk light)

Performance:
K&N Drop-In Filters
E370G Motordyne Shockwave Exhaust w/ 5" Burnt Tips

Wheels/Suspension:
Eibach Pro-Kit IPL Lowering Springs
20mm H&R DRM Spacers (all around)
Michelin Pilot A/S 3+ 275/35/19 Rear Tires
Hercules Raptis R-T5 245/40/19 Front Tires

Other:
Whiteline Differential Bushings

Now for some pictures...

https://cimg5.ibsrv.net/gimg/www.myg...9a3b5e4181.jpg
https://cimg8.ibsrv.net/gimg/www.myg...7f13bcfe02.jpg
https://cimg0.ibsrv.net/gimg/www.myg...5fa9b1fd13.jpg
https://cimg3.ibsrv.net/gimg/www.myg...8bc57b9bbe.jpg
https://cimg4.ibsrv.net/gimg/www.myg...57b03f220c.jpg
https://cimg6.ibsrv.net/gimg/www.myg...ca1701f6d1.jpg
https://cimg7.ibsrv.net/gimg/www.myg...d9037223c9.jpg

Now let's talk performance. Here's a dyno sheet of my IPL on stock ECU with just K&N drop ins...

https://cimg0.ibsrv.net/gimg/www.myg...728136e439.jpg

Mustang Dyno , 3rd gear pull, not sure about elevation, pretty hot day (78 degrees),highest power obtained got printed out. Now the 292hp was exactly where I predicted it to be. However, the 228tq is a bit disappointing. I was told the dyno read pretty low but I really don't want to play that game. The numbers are there, no imagining it on another dyno would make them go up. But now I have a baseline of how much power I will gain once I get full bolt ons and a tune. That's it for now. I have big plans for this G and I hope this build goes a long way. Thanks for checking out this thread!

Do a ecu tune, you will be more than surprised!

Quote:

Originally Posted by youdunseeme (Post 4238759)

Do a ecu tune, you will be more than surprised!

I will once I have FBO! I’ll be on Uprev with ARC tune.

Beautiful, absolutely beautiful. That blue is amazing.

Let me know how installing the 5" MD tips go. I have the IPL kit and my 4.5"s hit my bumper. I think I need to adjust the exhaust. I am replacing my rear bumper soon and want to make sure the new 5" tips fit without burning/hitting the new bumper.

Quote:

Originally Posted by jpowersjr2 (Post 4239253)

Thanks man, I installed the catback myself but it was hanging way too low and the passenger side exhaust cutout got burned. I went to a shop to put it on a lift and have it adjusted and it came out much better.

Motordyne E370G Catback Exhaust Install

Finally got my exhaust and installed it in my carport the same day. Install went pretty smooth and the outcome wasn't as bad as I thought until I got my G up on a lift and saw how much maneuvering I could've done. When I installed it myself, I had to twist the midpipe muffler at an angle so that the tubes can be aligned straight. The tips came at an upwards angle so my solution to that was to take the top screw off from the 5" tips and only have the sides hold on to the outlet tube.
https://cimg4.ibsrv.net/gimg/www.myg...de588a2369.jpg
https://cimg6.ibsrv.net/gimg/www.myg...9731d24b8b.jpg
https://cimg9.ibsrv.net/gimg/www.myg...83d9bbd8a9.jpg
https://cimg1.ibsrv.net/gimg/www.myg...c6077abf9f.jpg
Clearance was horrible but that was on me. The exhaust was roughly 4"-5" off the ground and the passenger tip barely touched the bumper and later on burned a good portion on the exhaust cutout. I took the defeat and called up a good exhaust shop I know to see if they can make some adjustments and to see it up on a lift. All it took was some forceful budging with a pry bar and the midpipe muffler was completely straight and the tubes could be twisted more upwards.The IPL bumper made fitment a bit more harder to perfect but it was fixed by moving the rubber hangar outwards and adjusting the screws on the tips. Huge shoutout to Mariella from Motordyne for hooking me up with the washers that go between the metal hangar and the underbody of the car. Without them, I'm sure the 5" tips would be hitting the bumper. These are some pics of the final fitment:
https://cimg8.ibsrv.net/gimg/www.myg...59080417b3.jpg
https://cimg9.ibsrv.net/gimg/www.myg...6cd7440670.jpg
https://cimg1.ibsrv.net/gimg/www.myg...c535282fd6.jpg
https://cimg2.ibsrv.net/gimg/www.myg...0927e533f9.jpg

Now for the sound. It sounds absolutely incredible! At cold start, it would get pretty loud but would quiet down in a few seconds. The exhaust note is by far the best on the G37 comparable only to Meisterschaft. From idle to about 3.5k rpm is a low rumble and fairly quiet but at it's sweet spot, 3.5k to 5k rpm, is where the exhaust sings. One of the best mods I've done so far. I'll be pairing it up with ART pipes in the future so stay tuned.

I picked up some hanger spacers from CWorksDesign to get my 5" tips to clear. Check my IG: jpowers36

So I was reading your top post, then scrolled down and this blue slapped me right in the face... wow!

With that Cosmic Blue wrap, this might be the only time ever that I like the whole burnt Ti look on exhaust tips. It's a perfect look for your car. Bet it sounds great, too.

Quote:

Originally Posted by Rochester (Post 4242090)

Haha, much appreciated. The exhaust sounds amazing. I'll post a clip of drive bys and revs when I have the time to record them

You have a really good eye for taking photos.

Some people go nuts trying to dial in wheel fitment, and here all you did was Eibach springs and 20mm spacers on the OEM wheels, and it looks perfect. :CLAP:

Have you considered wrapping the hood to match? I understand the motivation to show off the CF, but the transition is awkward, IMO. And on a much smaller scale, same for the upper/lower chrome trim on the grille.

No engine bay bling yet? I bet that's coming eventually ;)

Quote:

Originally Posted by Rochester (Post 4242139)

I LOVE showing off the carbon fiber. I thought about wrapping it but it'd be too much blue from what I pictured in my head. The chrome trim/emblem on the grille definitely has to go however. I'm either going to hydrodip or spray paint it if I get too impatient. No engine bits yet; I'm spending the money to get the G on the track as much as possible this summer. Just ordered some new tires and pads. Here's hoping it'll last the whole track season haha.