@mattlorentzoe’s G37x build (mid 12s n/a)
#286
Lol umm ok not sure how the pics (all 3 of them) are unrelated when it's a thread about modding a g37x so I'm just sharing my own and you had a similar setup so that's why I was asking how it all worked, if it did work. So you're saying all you did was switch up the tune/tuner and it's working normally now?
Rarely ill get a cold start that is rough. Most of the times it’s perfect 👌🏻
#288
The following users liked this post:
Mattlorentzoe (07-13-2019)
#290
Finally some goodies...going to do the comparison soon on dyno at soho motorsports.
Z1 plenum/eps throttle bodies vs RHM 75mm conversion.
We will be trying to tune to get the most out of both. Lots of data to collect. Also swapping to ecutek so also going to see which makes more uprev or ecutek...
Z1 plenum/eps throttle bodies vs RHM 75mm conversion.
We will be trying to tune to get the most out of both. Lots of data to collect. Also swapping to ecutek so also going to see which makes more uprev or ecutek...
The following 4 users liked this post by Mattlorentzoe:
The following 2 users liked this post by jpowersjr2:
Mattlorentzoe (07-13-2019),
wannabetoughguy (07-03-2019)
The following users liked this post:
jpowersjr2 (07-12-2019)
#293
😆😆🤣 haha to be fair the car is still on jack stands. Now for a different reason. Took the ksports off yesterday. Looking forward to swapping on the new ones. (Had an order issue, the shop that ordered the coils 2 months ago never ordered them lol. So I’m waiting again.
Haha first world problems
Haha first world problems
The following 2 users liked this post by Mattlorentzoe:
jpowersjr2 (07-14-2019),
wannabetoughguy (07-13-2019)
#295
I’ll be driving up to soho Motorsports to retune on Friday the 23rd. Lol so hang tight till then. Lots of cool info coming!
Picking up a set of track tires tomorrow. Project is really coming together. Still have to get my emissions and tag stuff done also.
So I’ve been busy, since April I’ve swapped the following...
Tuners
Admin to soho
Intake
Admin to rabbit hole motorsports (with vstack)
Plenum
Z1 to rabbit hole motorsport 75mm conversion
Pcv delete
Eps to Rabbit hole motorsports
Throttle bodies
Eps 70mm to maxima 75mm
Lower manifold
Synolimit to z1 motorsports
Headers
Stillen to ppe (with parallel collector)
Exhaust
Fast intentions to soho ypipe and single exit
Coilsovers
Ksport to feal 441+
Soon to be swapping
Uprev to ecutek on the 23rd of this month.
Also upgrading to a 34 row oil cooler and moving the existing 25 row cooler that’s on the engine to the transmission. The Stillen is smaller than I’d like for built trans.
Picking up a set of track tires tomorrow. Project is really coming together. Still have to get my emissions and tag stuff done also.
So I’ve been busy, since April I’ve swapped the following...
Tuners
Admin to soho
Intake
Admin to rabbit hole motorsports (with vstack)
Plenum
Z1 to rabbit hole motorsport 75mm conversion
Pcv delete
Eps to Rabbit hole motorsports
Throttle bodies
Eps 70mm to maxima 75mm
Lower manifold
Synolimit to z1 motorsports
Headers
Stillen to ppe (with parallel collector)
Exhaust
Fast intentions to soho ypipe and single exit
Coilsovers
Ksport to feal 441+
Soon to be swapping
Uprev to ecutek on the 23rd of this month.
Also upgrading to a 34 row oil cooler and moving the existing 25 row cooler that’s on the engine to the transmission. The Stillen is smaller than I’d like for built trans.
The following 2 users liked this post by Mattlorentzoe:
jpowersjr2 (08-18-2019),
ZontheRocks (08-09-2019)
#298
So swapped tires also. Left that off the list...
yokohama AD08R to Mickey Thompson street comp...
found a steal locally for these tires. $300 for all 4 tire
Still 9/32 left out of the 10/32 it comes new with...
(100 miles on the tires the guy decided he wanted staggered cobra wheels and can’t use these anymore)
yokohama AD08R to Mickey Thompson street comp...
found a steal locally for these tires. $300 for all 4 tire
Still 9/32 left out of the 10/32 it comes new with...
(100 miles on the tires the guy decided he wanted staggered cobra wheels and can’t use these anymore)
The following users liked this post:
jpowersjr2 (08-18-2019)
The following 4 users liked this post by Mattlorentzoe: