When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hows it going yall? My names Matt and I live in Atlanta Georgia. My car is a 2011 g37x sedan. Named her Marsha since its same color as marshmallows. I bought it stock in may of 2013 with 20k miles and have been modding it ever since. Now has around 108k miles(as of Nov 2020). Check my Instagram @mattlorentzoe or this build thread below for details
Check out the mods currently installed below! I ran 12.6@109 (no launch just off idle) at silver dollar raceway. Car weighed 3620 for that run (car is now 3550 no driver 3/4 tank)Lots has changed since then and looking for low 12s this year!!!
Tuner
Nik@ Soho Motorsports on ECUtek
Bolt ons
-3 inch intake w/ vstack
-Eps 70mm Tb
-Z1 motorsports ported upper and lower -PPE long tube headers with parallel collector(1.75 stepped to 1.88 OD, Collector is a 3-1 parallel merge collector that exits at 2.25" and transitions to 2.5") -Soho motorsports y pipe (2.5 into 3 inch) -Soho motorsports single exit (3 inch exhaust)
-Z1 motorsports premium gaskets
Differential Custom one piece rear driveshaft 2008 G35 VLSD sedan rear differential(4 bolt flange off a manual) 3.69 2008 G35x OPEN sedan front differential 3.69 Bell raceworks - rear diff brace
Whiteline - Differential bushings
Z1 Motorsports - rear diff kit New front cv axels (replaced with oem)
Transmission Exedy - Technics sports 7at clutch set
Fast intentions - billet aluminum Flex plate
Level 10 - 3000 Torque converter
Level 10 - Transmission valve body
Fluids Motul - Sport 5w40 ester blend
Motul - Rbf660
Motul - multi ATF (transmission, power steering, transfer case) Motul - 75w90 (Diff fluids)
Nissan - Coolant (blue 50/50)
Interior Window tint 35% all around
Re-wrapped oem steering wheel by Ryne
WeatherTech - Floormats
WeatherTech - windshield cover
carsmo - carsmo *****
Lighting Diode Dyanmics - Interior and exterior full led swap
Diode Dyanmics - Tail as turn
Morimoto - Morimoto xb fog lights
Exterior Chrome delete on windows and trunk
G25 badge on trunk
Oem tow hook (painted black, blends in you can’t ever see it. I also cut a hole in the trim piece that fits around the oem tow hook that finishes off the lower grill)
Oem midnight black front grill Paint matched engine cover
Last edited by Mattlorentzoe; 11-23-2020 at 08:55 AM.
Rear end links and camber arm Fast Intentions 2.5 inch exhaust. 18 inch resonators. K sport coils K sport coils and spl front control arm Spl front end link 3780 with full tank of e85 and no driver.8 week old German Shepherd puppy Rear toe arm. Deleted the spring bucket on both sides.
Magnetic oil drain plug broke in half lol
Oem tow hook painted back with hole dremeled out. Planning track day soon
Got the engine cover painted color code QAA (moonlight white)
Where the stillen headers are hitting the steering column?
Stillen said it will be around a month before they can get new ones sent to me with correct clearance. In mean time they told me to take a hammer and put a dent so I can safely take right hand turns The z1 headers that don't fit..... <br/>Driver side motor mount on the X will not clear the first header run
Plugs at 44k. Not in that bad of shape, but need step cooler for nitrous. No oil found with spark plugs.(I have seen a few that have bunch of oil on top of plug.)
Oem gtr plugs (do feel difference on butt dyno)Ran out of track. In 6th with 2200rpm left and still had all of 7th! Never been over 120 before this in my g.really cool air field. I'll have to go back for some 0-150 videos after nitrous in installed
This part bolts to the oil filter bracket from the hose You can see the light coming in. When I drained oil I was a quart short or so. Luckily I caught it after it happen. Smell was terrible. Hot oil all over a hot exhaust!
New one was $30 and is a completely different design.
The adaptor for my z1 oil cooler blew out causing a lot of jmy oil to spew out
Last edited by Mattlorentzoe; 03-24-2018 at 12:15 PM.
Looks great man! Z1 should sponsor your car with all those parts from them!
Can't wait to see the NOS tank installed! I don't think I've ever seen a G with nitrous yet How much nitrous are you planning on spraying?
Would like to do 50 shot in each intake. But I might just do a 75 shot to be on the safer side.
I'll be leaving it up to Jon at z1 to work his magic. Still deciding if I'm doing the window switch or the wot switch. I'm leading toward the wot personally
[QUOTE=blnewt;4021434]You've been very busy Lorentzoe, nice list thus far, keep up the nice work, and look forward to your wheel update when the time comes
BTW, that's one gigantic rotor lol
[/QUOTE
Hahahah you have been consulted on many of these mods before they were installed. Thanks for your help my cars really coming together. Can't wait to take it to the track and get a 1/4 mile run in before the nitrous install for comparison
I have no dyno results with it on but I came from the k&n typhoon. I like it a lot for me I knew it had to be a long tube intake. This was my setup before I swapped them. I recommend them or any long tube intake.
Are you going with the Nitrous Express kit? 100 shot? I was going to do this, but I was;t able to find a tuner to tune it that felt comfortable. I hope this works out well for you We have a lot of the same mods.
Are you going with the Nitrous Express kit? 100 shot? I was going to do this, but I was;t able to find a tuner to tune it that felt comfortable. I hope this works out well for you We have a lot of the same mods.
Ya foreal lots of same mods. I'll be finding out more info in a pm about the trans setup and pricing.
Yes I'll be doing a 100 shot.
I'll be putting in this stuff myself before I drop off car to save some cash.
-one step colder plugs (maybe gtr? I think they might me not step cooler but if they are that's what I'll go with)
-bottle warmer
-blow down tube
-remote bottle opener
-purge
-running whatever lines I can without actually hooking anything up lol
Kit that z1 recommends is the zex kit for the 07-09hr. Honestly haven't bought the kit yet. I'll look into the nitrous express. Any major difference between the 2 kits?
Just wondering if you have had any luck with your Nitrous system. I have had 2 kits on my other cars but never pushed more than 100 hp on the highest which was on a 99 dodge dakota r / t with the 5.9L V8. I have always been told that basic rules of nitrous are around 30hp for every 100 factory hp was thought of generally safe. But don't like the idea of that much nitrous in a smaller engine even though the g37xs I have is rated for over 300hp and my dakota waz 250 but had 350tq. Just wanted to find out what the results are.
04-18-2016, 09:11 PM
<br/>Driver side motor mount on the X will not clear the first header run
How much nitrous are you planning on spraying?
