Arxylis's 08 Coupe build
**UPDATED 10/10/17**
Current mods: Debadge trunk (Leaving only the Mt. Fuji) LED's for doors, map lights, and license plate Clear GTR map light lenses Red GTR start button R2C intake Beluga axle back OEM rear spoiler Diode Dynamics Tail as Turn modules Generic dash cam OEM footwell lighting Upgraded to 2011+ gauge cluster New OEM steering wheel Motordyne XYZ pipe with resonator Z1 HFC's Z1 Rear differential upgrade kit Z1 Ported UIM Z1 Poly motor mounts Z1 Poly transmission mount Cusco strut tower brace TransGo 5AT shift kit New (5k mile) engine ExLED map lights USB charging port between seat heat switches 3rd brake light flasher Gunmetal metallic vinyl wrap over washi trim Navtool 3.0 interface Uprev tune Aftermarket backup camera Android based multimedia system HDMI port mod BlueBatmobile GT-R style tail light overlays 20% tint IPL front bumper Tow Hook Feniex and Abrams emergency lighting Gloss black roof wrap 35% tint all around OEMassive GT-R style headlights To be installed: Future: Remote start Hotchkis swaybars Tokico Blue shocks RS-R Down Sus springs Z1 Brake upgrade kit IPL side skirts Autokits v2 diffuser Flat bottom steering wheel Custom mesh grille with illuminated Fuji Wheels (still not 100% on which ones, though) Wrap entire car (I'm thinking matte metallic blue with a black roof and mirrors) https://cimg3.ibsrv.net/gimg/www.myg...04751d2952.jpg |
So here's what I've got so far, as of 1/8.
GTR lenses and start button https://cimg2.ibsrv.net/gimg/www.myg...afa9446c14.jpg https://cimg3.ibsrv.net/gimg/www.myg...667214a8a8.jpg https://cimg3.ibsrv.net/gimg/www.myg...eef5eb2014.jpg https://cimg4.ibsrv.net/gimg/www.myg...5052f4d9e2.jpg Debadged trunk: https://cimg0.ibsrv.net/gimg/www.myg...91427d971a.jpg https://cimg1.ibsrv.net/gimg/www.myg...076ac5d371.jpg I swapped out the guts on the button so it will light up white. I may solder in some different/brighter SMD's for the button though. Anyone know what size they are off hand? |
The axle back is due to be delivered Saturday, the Tail as Turn modules and intake on Monday, and the spoiler should hopefully be Tuesday or Wednesday. :BOUNCE:
|
Nice start, any plans to lower your G?
|
Originally Posted by blnewt
(Post 3983519)
Nice start, any plans to lower your G?
I'm not sure what is on it right now, as it seems a bit lower than stock when comparing it to other pictures online. I don't want to go too far as the most of the roads out here are horrible for anything other than a lifted truck. My Evo was lowered a bit on coilovers, but that thing had loads of clearance under it. I've already scraped the exhaust on the G the way it sits now. :icon27: |
Quick update:
Due to the gross incompetence of FedEx (again) the exhaust has been rescheduled from today to Tuesday. Even though it is sitting at their warehouse 10 miles away and has been since yesterday, they couldn't bother themselves with throwing it on a truck this morning. The intake, which was scheduled for Monday from UPS, looked like it could have been delivered today, since it got to their warehouse yesterday too, but it looks like it is going to sit over the weekend as well. The spoiler is slated for Wednesday from FexEx, but knowing them it may not be until Friday or so. I've had several instances where something would say it is out on the truck for delivery, just to be updated later in the day saying no attempt made. This has happened several days in a row before. The good news is that the USPS looks to be living up to their motto, as the Tail as Turn modules that were originally supposed to arrive Monday have made it to my local post office and are currently out for delivery. FedEx though... they constantly disappoint me. I have had more issues out of them than UPS, The Postal Service, and DHL combined. I wish I could choose the shipping company when I order something, because I would never give them my business again. Anyway, that's how it stands right now. I'll post up some pics of the tails after I get them this afternoon. |
Tail as Turn modules are installed!
Took a whopping 10 minutes, and looks much better than stock. Everything is well packaged and very professional looking. https://cimg8.ibsrv.net/gimg/www.myg...a2a1c771a2.jpg https://cimg2.ibsrv.net/gimg/www.myg...08e254bdde.jpg https://cimg4.ibsrv.net/gimg/www.myg...d8ce8b90f5.jpg Showing the DD module installed on the left, and stock on the right. https://cimg5.ibsrv.net/gimg/www.myg...011a4919ca.jpg A quick video of the modules in action: Overall, I'm very pleased with the build quality and the results provided by Diode Dynamics. This is a must have mod. |
Off to a great start! Looking good man.
|
It appears that I have received faulty Tail as Turn modules. They work fine when the hazards are on, but the turn signals hyper blink. I have contacted Diode Dynamics via email, and if other members' experience is any indication I should get a reply fairly soon.
|
R2C intakes are installed!
They were well packaged and the parts are very well made. Install didn't take very long, and the only part that was of any difficulty was getting the passenger side hose lined up. Big shout out to Tunerz Store for the discount code, I almost went with the K&N on Amazon until I got a quote for this for the same price! https://cimg8.ibsrv.net/gimg/www.myg...1646f0f12.jpeg https://cimg9.ibsrv.net/gimg/www.myg...ee3082d35.jpeg https://cimg1.ibsrv.net/gimg/www.myg...a11480568.jpeg https://cimg3.ibsrv.net/gimg/www.myg...b358b9494.jpeg https://cimg4.ibsrv.net/gimg/www.myg...2749a1f91.jpeg https://cimg5.ibsrv.net/gimg/www.myg...ea1a87ebf.jpeg |
Nice job sir!
|
The OE spoiler and Beluga axle back arrived today.
https://cimg9.ibsrv.net/gimg/www.myg...028ae3e2c.jpeg https://cimg0.ibsrv.net/gimg/www.myg...a5104ba73.jpeg I wanted to get the exhaust put on first, but ran into some issues... All 4 bolts holding the stock axle back on the car snapped off. This allowed me to remove the stock muffler, but the remaining part of the bolt was rusted to the flange like it had been welded. https://cimg9.ibsrv.net/gimg/www.myg...b67a55456.jpeg I hit it with PB plaster, a wire brush, and a hammer and nothing would budge. I finally brought out the big guns but it didn't do much good: https://cimg4.ibsrv.net/gimg/www.myg...dd0d3ec16.jpeg Looks like I'm going to have to take it to a shop and get the bolts cut out. Gotta love the hell that road salt and the like does to these things... :icon27: So I decided to get some of my frustrations out by drilling several massive holes in my car! I didn't get any pictures of the process of setting up the template and the holes themselves, and I literally felt sick to my stomach hoping I got everything measured right, but the spoiler is installed! https://cimg2.ibsrv.net/gimg/www.myg...92a7f5bded.png https://cimg9.ibsrv.net/gimg/www.myg...f10a2aa58.jpeg It looks so much nicer than that goofy chrome lip, I'm not sure why that ever made it into the final design, but I digress. Overall, I'm happy with how most of it turned out. Once those pesky bolts have been sent to the fiery depths from whence they came I can bolt up the axle back. Then the initial part of my build has been completed! Gotta wait until tax time before I do much else though. I'm thinking strut bar and replacing those headlights that have been painted with stock 2011+ black chrome housing ones. :icon38: |
Went to an exhaust shop up the road from me to get the exhaust studs knocked out and have the Beluga axle back installed. The shop needed to heat and bend the hangers on both mufflers to get them sitting correctly, the left one needed more work than the right. I seem to recall others having that issue as well.
https://cimg8.ibsrv.net/gimg/www.myg...328d15a069.jpg https://cimg9.ibsrv.net/gimg/www.myg...509dc3ea27.jpg Sound wise it isn't much quieter than when the muffler was off completely. The rasp in the higher RPM's that was present sans muffler has been eliminated though, and it sounds very nice when accelerating. There's some drone when cruising around 60 that may or may not settle down as the mufflers break in, but I'm not too worried about it as that's the price to pay for a more open exhaust. Power wise I haven't noticed anything with the intake or axle back, but I kind of expected that. These mods are really more for looks and sound than anything. There may be a handful of HP here and there but I'm not going to be upset if there isn't. Also, while out and about today I stopped by a local dealership and took a look at this beast: https://cimg9.ibsrv.net/gimg/www.myg...a0024f08e8.jpg https://cimg4.ibsrv.net/gimg/www.myg...f6c30afc6e.jpg https://cimg2.ibsrv.net/gimg/www.myg...9864b9f4cb.jpg https://cimg0.ibsrv.net/gimg/www.myg...81f11496e5.jpg |
That new axleback looks nice back there! Glad it wasn't too bad to install w/ just the right amount of heat.
GTR pics are frowned on around here, gets the natives restless (j/k) G is coming along nicely |
LIKE!
Tnx for the GTR pix and the thoughts on the upgrades. |
All times are GMT -4. The time now is 07:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands