ANMVQ

iTrader: (13)

Yea If its the front struts I'll replace them with the stockers, I had coils and the cost , and noise they made a lost a lot $$$. I don't trust coils on the X's, I just dropped it off to get looked at.

ANMVQ

iTrader: (13)

Think its this? Wonder if this was causing vibrations on the motor? I know I'm hoping against hope but maybe this will solve my timing being pulled :/

Sway bar was rubbing laying on my aluminum slash sheild :/

ANMVQ

iTrader: (13)

Old "Defective" header clearance from the steering shaft was 4.220mm now with the new header installed is 6.8MM Header was definitely defective.

Waste86

Was it the rubbing that was causing your "knocking"? I have heard of something similar happening. Hope you get all your issues sorted.

ANMVQ

iTrader: (13)

Negative car is for some reason now running rich up top, and the engine loads look weird, large jump in load about 3k, right were I am starting to see KR.

ANMVQ

iTrader: (13)

Few things added lately . I finally got around to and idea I had for the slit in the AK CF rear diffuses

zer099

iTrader: (2)

I kind of like that third lower brake light idea. What you use to make it happen, if I may ask? Might borrow the idea.

ToXIc

iTrader: (2)

Looking great.

Upscale Speed

iTrader: (18)

Good idea Mike

ZahyMatar

iTrader: (4)

+1 on the rear fog light

ANMVQ

iTrader: (13)

Of course man go ahead. I only wired to the license plate lights. The LED strips are from advanced auto 36$! Two LEDs and they have about 1.5 of lead wire so plenty to get the plate lights. I was going to wire one tot the brakes but would have need more wire and would have had to split the up. One for parking lights and one for brakes. I still might do this in the fall by will have to buy another light strip. But it looks really good the pic does no justice. Even th wife was like WHOA MAN!!

zer099

iTrader: (2)

Brilliant! Thank you.