Do Vossen 084's + Eibach Springs = Rub?
 

Just curious if anyone out there with a 37s is running Vossen 084's on Eibach Springs; and if you rub at all or not? Thanks!

all depends on wheel size, offset, and tire size. if you get the correct sizes, you shouldn't have any rubbing issues.

Well, I ordered the 084's with Vredestein Ultrac Sessanta 20" 245/30 & 285/25 if that helps... gonna try them on before ordering the springs.

What offset and width are the wheels?
And what size tires?

I have 9.5/10.5 inch on mine with Eibachs. with 255/35 and 285/30 Yoko S.Drives

It rubs the fender well liner on big dips and bumps. I can live with it. .

^ Same here

I just checked out the vossen website and they are listed as 20x9.0 and 20x10.5. As for the offset, no info. They are supposedly "direct fitment" for the G37S and no spacer is required. Tires listed above.

Per PM I have from D2-AUTOSPORT, the offsets at 32 and 37.

They don't rub. I have eibach/tanabe combo. And the VS084's do not rub up front, or in the rear, although I have tanabe springs in the rear, I am certain you won;t have issues with the eibachs, since the tanabe's are lower than the eibachs in the rear. I am running 255/35 front 285/30 rear on Yokohama S.drives

I think you got the wrong info on your springs because the Eibach's are lower than the Tanabe's in rear too. According to Tanabe's website, their NF210 springs for the G37 drop the front 1" and the rear .7" where the Eibach Pro Kit drops the front 1.2" and the rear .8";)