When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi everyone, I have a 2013 g37x coupe, I recently installed swift lowering springs and noticed that my passenger front had more negative camber than the driver front. It's really off and you can tell by just looking at the wheel that it's not the same at all(I have the alignment sheet attached below). I got recommendations to get front-camber arms, but I need to know the issue first because I believe one side is sitting lower than the other. I measured the bottom of the wheel to the fender and it's off by a 1/4 of an inch on one side. people are telling me it's a bad strut, I just can't seem to wrap my head around the issue. Any recommendations would highly be appreciated.
Are the springs new? There's suppose to be some settling period on new springs. I can also see bad struts causing it to sag also.
I actually had H&R springs before the swift springs and I thought maybe I had a bad spring,that was the reason I purchased the swift springs and the same issue still occurred.
I actually had H&R springs before the swift springs and I thought maybe I had a bad spring,that was the reason I purchased the swift springs and the same issue still occurred.
gotcha, i had H&R springs and it was an even drop front to rear for me. Love those springs.
Since the shocks weren't changed between the two springs, I'd point to those.
Can you push down on one side more than the other?
04-05-2023, 08:43 AM
