Working on Alternative AWD Sedan Shock Option
#17
Registered User
Thread Starter
Springs are something I’ve been working on. The lack of data on our various stock parts between the Infiniti and Nissan lines is amazing. I refuse to use progressive rates, and trying to compile a list of stock rates and free length to make choices easier.
Update.
The listed Koni inserts require a strut tube that is >1.71” in diameter. Below the rolled crimp of an own strut is 1.65. Looks like there is some stretch room to play with.
The problem i am seeing is the shortest insert is 1.5” length than sock. I shot an email to Koni since I know they have smaller inserts in their lineup.
#18
Super Moderator
iTrader: (7)
"The problem i am seeing is the shortest insert is 1.5” length than sock"
Is that supposed to read, "The problem i am seeing is the shortest insert is 1.5” longer than stock strut length"?
If you're interested in the rear free length of RWD S, I can help with that. Front springs are still on the dampers.
Is that supposed to read, "The problem i am seeing is the shortest insert is 1.5” longer than stock strut length"?
If you're interested in the rear free length of RWD S, I can help with that. Front springs are still on the dampers.
#19
Registered User
Thread Starter
"The problem i am seeing is the shortest insert is 1.5” length than sock"
Is that supposed to read, "The problem i am seeing is the shortest insert is 1.5” longer than stock strut length"?
If you're interested in the rear free length of RWD S, I can help with that. Front springs are still on the dampers.
Is that supposed to read, "The problem i am seeing is the shortest insert is 1.5” longer than stock strut length"?
If you're interested in the rear free length of RWD S, I can help with that. Front springs are still on the dampers.
Yep longer. I was already planning on overboring the bottom of the housing and working with my machine shop owning buddy to fab spacers to accommodate. Honestly if I can get a 12.5” long, 4.25” stroke, 1.8” OD insert I’d be happy.
Don’t need the rears as Koni has an off the shelf figment for the rwd cars.
I have an email in tona contact at Koni to see what they have that will give me a precise fitment. There are a ton of inserts they make, but the recent catalogs only list a handful.
Thread
Thread Starter
Forum
Replies
Last Post
mjnoles1
G37 Coupe
5
11-16-2012 12:15 AM