Installing stop tech brake lines
07-02-2017, 12:48 PM
#1
Registered Member
Thread Starter
Installing stop tech brake lines
Installing SS brake lines -
Always remember to turn your wheel right to left and back to all they way right to ensure the lines isn't getting pulled and Then tighten all the nuts.
Any advise, thoughts or comments welcome.
Happy 4th of July.
Always remember to turn your wheel right to left and back to all they way right to ensure the lines isn't getting pulled and Then tighten all the nuts.
Any advise, thoughts or comments welcome.
Happy 4th of July.
07-02-2017, 08:37 PM
#2
My Wilwood SS lines took a bit of trial & error to find a good mount and routing so I could go lock to lock without any interference. I'd get it back on jackstands and try several different line routes to find the best route that has the most slack (and can still be well secured).
Hard to find any install pics, here's one thread
https://www.myg37.com/forums/brakes-...rakelines.html
Hard to find any install pics, here's one thread
https://www.myg37.com/forums/brakes-...rakelines.html
Last edited by blnewt; 07-02-2017 at 08:50 PM.
The following users liked this post:
G10 (07-03-2017)
