drizzy315

you guys know how this works because the delaer just confused the crap out of me but those guys working there are usually meatheads anyways....they are telling me the part number for my rotors are 40206 eg000 front and 43206 eg000 rear. now when i look this part up in ebay for example is shows part is for a nissan and not compatible for mine i have a 2010 sedan g37x. when i check online for exmaple this site 10 2010 Infiniti G37 Brake Rotor - Brake - Beck Arnley, Brembo, Centric, EBC, Genuine, Kiriu, Mountain, Pilenga, Pronto, Winhere, Front, Front Left, Front Right, Rear, Rear Left, Rear Right - PartsGeek
part is totally different but says the part is compatible.

can you guys clarify what is correct part number im trying buy oem not aftermarket. please assist guys

blnewt

iTrader: (13)

Just go to KNS Brakes you'll get better parts for less money and they sell alot of Infiniti parts here & at G35driver.com.
You might even send a PM to KNSbrakes on the site for a better deal.

'11G37S

iTrader: (4)

I wish I saw this before having my pads replaced... $$$$
book marked for future reference.

drizzy315

thanks bro u always chime in... cheking it out now. so you think aftermarket better than oem? why u say that

JSolo

iTrader: (14)

To the OP, since you posted in the sedan section, it's safe to assume you don't own a coupe.

With that out of the way, if yours is a sport, but not awd, then you need the following:

Front 14.0" x 1.3"
Rear 13.8" x .8"

If yours is rwd, awd, or awd sport, then you need
Front 12.6" x 1.1"
Rear 12.1" x .6"

The rest are just options, standard, slotted, drilled, slotted and drilled, etc.

My recommendation, if it's a daily driver and you have no intention of tracking the car or doing other hpde activities, just go with the standard rotors. You don't need slotted/drilled/etc other than for appearance.

I'd also say that picking the proper pads is more important than rotors. Those directly affect initial bite, pedal feel, dust, braking power than rotors do.

Rochester

iTrader: (8)

For yuks, flip that question on end and ask which OEM parts are better than aftermarket.

I'm stumped.

CodeG

Generally for street driving OEM parts are better. It has consistence quality and you know it will fit properly. I cannot say the same for after market parts.

blnewt

iTrader: (13)

I would say that may apply for quite a few parts, not sure regarding rotors & pads. Pretty good quality control w/ the common aftermarket brands.

drizzy315

what best way search parts sold onthis website? or even g35.com a general search or where do i go? thanks guys

blnewt

iTrader: (13)

I'm assuming you mean new parts from site vendors so here's the G37 vendor section, then just pick the sub-listing for which parts you're after
Supporting Vendors - MyG37
Here's the G35 vendor site
Vendor Classifieds - G35Driver

drizzy315

Youre da man bl thanks a lot looking now

rhdh104

iTrader: (2)

The OEM pads for a G37s Coupe .... are they Ceramic ..?

canucklehead

iTrader: (9)

^ yes. same as the RWD S sedan.

Lego_Maniac

iTrader: (3)

I'd take OE rotors and pads over Chinese made "aftermarket" parts