m3clubracer

When I turn on my head lights one clicks (ballast?) and flickers but doesn't turn on. Is that a ballast problem? I removed it from the assembly and I got it to turn on but it just won't any more installed in the HL assy. Searched for clicking and ballast not direct similar problem. Please advise! Thanks in advance. Philip

Surfnazi

Ballast is going out easy swap

m3clubracer

Yeah specifically the leads for the ring around the bulb. When I saw the arcing on the new bulb and the same on the old AND read somewhere that not enough current was getting to the bulb I thought to look here. One of the two leads I almost dremmeled off! I also cleaned the bulb of the arcing.

Surfnazi

The housing for projector lights are set to accept bulbs that have tabs that align for projector lights. You can dremel it but it might not seat all the way or stay tight

m3clubracer

Yeah I'm looking for an igniter by itself, or two.

m3clubracer

I should re subject the post as "clicking igniter"

Surfnazi

Are they both having issues if not use parts from good side on bad side and see if its ignitor or ballast

BULL

I have 2 ballast with igniter and bulbs if you're interested. I also have a projector by it self.
PM me.