Interior trim kick panels not flush? Check this out.
Depending on the model year you have this may or may not be an issue for you. My '08 kick trim panels would get pushed back when the front seats were slid all the way forward. On older models that trim panel is two separate pieces where the vinyl/leather/whatever is attached by adhesive to a plastic backing. I purchased a pair of kick panels from a 2012 model after I discovered that the part had been updated to be one solid piece. After installing them I noticed a big difference but also that they still did not fit flush 100%. So seeing as I just ripped apart my interior trim (Tesla Screen in CF and CF trim going in soon), I decided to take a look at what the tabs on the trim pieces could be anchored to. The "female" tabs had no "male" tabs to snap into place. So I decided to use one of the best inventions ever made; zip ties. I attached zip ties from those "female" tabs to in the middle where what I think is one of the ashtray mounts. When you attach these be sure to not pull the zip ties too tight as I broke one of the tabs on the passenger side. To fix that I simply routed the zip tie at an upward angle versus pulling straight from the side of it.
For a video of the panel differences, check out my IG: jpowers36. https://cimg6.ibsrv.net/gimg/www.myg...2f39732728.jpg Driver side. https://cimg5.ibsrv.net/gimg/www.myg...ff415baff8.jpg Passenger side (where I broke the tab and routed it upward). https://cimg4.ibsrv.net/gimg/www.myg...337db8f4e0.jpg Closer look at broken tab but angled up so it still works. https://cimg7.ibsrv.net/gimg/www.myg...451a7e63c1.jpg Driver side closer look. https://cimg7.ibsrv.net/gimg/www.myg...a158ea7066.jpg Driver side outside https://cimg4.ibsrv.net/gimg/www.myg...739d18331e.jpg Drive side outside 2 https://cimg6.ibsrv.net/gimg/www.myg...6b340ebbed.jpg Passenger side (color doesn't look off in person) https://cimg5.ibsrv.net/gimg/www.myg...cf2c7171a1.jpg Passenger side 2 Cheers guys! |
actually there is tab with a white clip over it that female part of the panel is supposed to clip into. urs must be broken off or something. its not supposed to be able to just flap off like that
|
Maybe because mine is an '08 and the new panels are from a '12? Not sure....
|
mine is an 08 too.
|
saywat?!? lol
I'll take a second look at it, thanks bro! |
All times are GMT -4. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands