Sedan Light Vinyl Covers?
Anything like the BlueBat Vinyl Covers I've seen on g35driver for a 2011 sedan. Heads and tails? Lemme know, thanks!
|
Contact BlueBat, he'll let you know what's available.
I know there's stuff to choose from. Check out these rear tail light covers. They are on my list of things to get: http://www.slammedenuff.com/uploads/...10415_orig.jpg |
Had both back in the day~
Not an easy install if you haven't worked w/ vinyl before. Here's the Blue Bat opaque headlight & taillight overlays http://imagizer.imageshack.us/v2/128...2/1000988l.jpg http://imagizer.imageshack.us/v2/128...8/1000996b.jpg I much prefer going the painted route, but the headlights are a labor intensive project, the tailights are much easier, especially since I have the exact vinyl cutouts for a perfect result~ http://imagizer.imageshack.us/v2/128.../1001561sg.jpg http://imagizer.imageshack.us/v2/128...540/z2hBnC.jpg http://imagizer.imageshack.us/v2/128...540/dpAn3j.jpg http://imagizer.imageshack.us/v2/128...0/703/eanb.jpg |
Originally Posted by blnewt
(Post 3863489)
Had both back in the day~
Not an easy install if you haven't worked w/ vinyl before. Here's the Blue Bat opaque headlight & taillight overlays http://imagizer.imageshack.us/v2/128...2/1000988l.jpg http://imagizer.imageshack.us/v2/128...8/1000996b.jpg I much prefer going the painted route, but the headlights are a labor intensive project, the tailights are much easier, especially since I have the exact vinyl cutouts for a perfect result~ http://imagizer.imageshack.us/v2/128.../1001561sg.jpg http://imagizer.imageshack.us/v2/128...540/z2hBnC.jpg http://imagizer.imageshack.us/v2/128...540/dpAn3j.jpg http://imagizer.imageshack.us/v2/128...0/703/eanb.jpg |
Originally Posted by roxx
(Post 3863505)
Hey, thanks for the reply! Has anyone ever reported any issues regarding leaking with the painted headlight housing? I was looking into having the headlights painted but I was a little nervous since I'm from Maine. A lot of shrinking and expanding since temps range from -10 to 90 in an average year. Nice G btw!!
Regarding sealing of the lights, if you use the butyl sealing tape from this vendor your chances of a leak are minimal, also on the other link is the STiR lens replacement. This is one of the best $50 mods you can do, it gives a razor sharp light beam cutoff and a nice blue edge flicker surrounding the beam, also the crystal clear lens looks 10x better then the stock fresnal lens which has little circles etched into the lens mold for a soft cutoff and no edge flicker. OCI Butyl Rubber Glue STi-R - Clear Lenses from The Retrofit Source |
Join me on facebook, and receive 15% off your Overlay order!
https://www.facebook.com/groups/bluebatoverlays/ Offer good through Februrary 28, 2014. B@t™ |
All times are GMT -4. The time now is 09:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands