Help Thinkware F770 2-Channel Dash Cam Install
#1
Registered Member
Thread Starter
Thinkware F770 2-Channel Dash Cam Install
Hello, I have a 2012 G37x sedan and am planning on installing a 2 channel (front & rear) dash cam. I need to run a cable from the front camera to the rear camera, so I'm wondering if you might have any suggestions of which way I can route the cable so that it's hidden and doesn't interfere with any side airbags.
Thanks!
Thanks!
#2
Registered Member
Thread Starter
Got everything installed over the weekend. Unfortunately didn't take any photos during the installation, but if anyone does have questions down the road feel free to ask. Cheers!
#3
Registered Member
I have the Rexing cameras.
https://video.search.yahoo.com/yhs/s...edia_emailmoji
Very easy to install both the front and rear cameras
Telcoman
https://video.search.yahoo.com/yhs/s...edia_emailmoji
Very easy to install both the front and rear cameras
Telcoman
#5
Registered Member
Thread Starter
Here's a video combining dark and daytime driving, it will switch between front and rear clips to give you an idea.
As for the installation I ran all the wires on the drivers side, pulled down the weather stripping from the front and rear doors, removed the kick panel to access the fuse box. Wires were run along the headliner, down the a-pillar for the hardwiring cable and the rear cable behind the molding of the side airbags.
Thread
Thread Starter
Forum
Replies
Last Post
landslide03
D.I.Y. Installations/Modifications
21
10-19-2015 02:37 PM