Bose Audio Wiring Breakdown
#1
Bose Audio Wiring Breakdown
Here's a wiring breakdown for the Bose amp and Woofer amp. Please note that wiring color may not be the same at the speakers. These are for at the amp only and the pin number reflects the harness seen from where the wires go in, not the terminal side.
Bose Amp
Harness B42 (Pin Number/Item/Color Code)
(1) Front Left Mid/Tweeter + (L)(Blue)
(2) Front Left Mid/Tweeter - (W)(White)
(3) Front Right Mid/Tweeter - (LG)(Light Green)
(4) Front Right Mid/Tweeter + (V)(Violet)
(5) Front Right Woofer + (G)(Green)
(6) Front Right Woofer - (R)(Red)
(9) Front Left Woofer - (W)(White)
(14) Front Left Woofer + (B)(Black)
(10) Power/Key (Y)(Yellow)
(11) Power/Constant (GR)(Grey)
(12) Ground (B)(Black)
Harness B41 (Pin Number/Item/Color Code)
(16) Rear Woofer + (SB)(Sky Blue) **Signal to woofer amp
(17) Rear Woofer - (V)(Violet) **Signal to woofer amp
(18) Rear Left Mid + (L)(Blue)
(19) Rear Left Mid - (P)(Pink)
(23) Rear Left - (SB)(Sky Blue) **Preamp from HU
(24) Rear Left + (V)(Violet) **Preamp from HU
(25) Rear Right - (Y)(Yellow) **Preamp from HU
(26) Rear Right + (BR)(Brown) **Preamp from HU
(29) Center + (L)(Blue)
(30) Center - (O)(Orange)
(31) Rear Right Mid + (LG)(Light Green)
(32) Rear Right Mid - (Y)(Yellow)
(33) Front Right + (R)(Red) **Preamp from HU
(34) Front Right - (G)(Green) **Preamp from HU
(35) Front Left + (P)(Pink) **Preamp from HU
(36) Front Left - (L)(Blue) **Preamp from HU
(20) Power/Amp On (W)(White)
Woofer Amp
Harness B43 (Pin Number/Item/Color Code)
(1) Rear Right Woofer + (G)(Green)
(2) Rear Right Woofer - (R)(Red)
(4) Rear Left Woofer - (B)(Black)
(5) Rear Left Woofer + (W)(White)
(8) Rear Woofer + (SB)(Sky Blue) **Signal from Bose amp
(9) Rear Woofer - (V)(Violet) **Signal from Bose amp
(3) Power/Amp On (GR)(Grey)
(7) Power (Y)(Yellow)
(10) Ground (B)(Black)
Bose Amp
Harness B42 (Pin Number/Item/Color Code)
(1) Front Left Mid/Tweeter + (L)(Blue)
(2) Front Left Mid/Tweeter - (W)(White)
(3) Front Right Mid/Tweeter - (LG)(Light Green)
(4) Front Right Mid/Tweeter + (V)(Violet)
(5) Front Right Woofer + (G)(Green)
(6) Front Right Woofer - (R)(Red)
(9) Front Left Woofer - (W)(White)
(14) Front Left Woofer + (B)(Black)
(10) Power/Key (Y)(Yellow)
(11) Power/Constant (GR)(Grey)
(12) Ground (B)(Black)
Harness B41 (Pin Number/Item/Color Code)
(16) Rear Woofer + (SB)(Sky Blue) **Signal to woofer amp
(17) Rear Woofer - (V)(Violet) **Signal to woofer amp
(18) Rear Left Mid + (L)(Blue)
(19) Rear Left Mid - (P)(Pink)
(23) Rear Left - (SB)(Sky Blue) **Preamp from HU
(24) Rear Left + (V)(Violet) **Preamp from HU
(25) Rear Right - (Y)(Yellow) **Preamp from HU
(26) Rear Right + (BR)(Brown) **Preamp from HU
(29) Center + (L)(Blue)
(30) Center - (O)(Orange)
(31) Rear Right Mid + (LG)(Light Green)
(32) Rear Right Mid - (Y)(Yellow)
(33) Front Right + (R)(Red) **Preamp from HU
(34) Front Right - (G)(Green) **Preamp from HU
(35) Front Left + (P)(Pink) **Preamp from HU
(36) Front Left - (L)(Blue) **Preamp from HU
(20) Power/Amp On (W)(White)
Woofer Amp
Harness B43 (Pin Number/Item/Color Code)
(1) Rear Right Woofer + (G)(Green)
(2) Rear Right Woofer - (R)(Red)
(4) Rear Left Woofer - (B)(Black)
(5) Rear Left Woofer + (W)(White)
(8) Rear Woofer + (SB)(Sky Blue) **Signal from Bose amp
(9) Rear Woofer - (V)(Violet) **Signal from Bose amp
(3) Power/Amp On (GR)(Grey)
(7) Power (Y)(Yellow)
(10) Ground (B)(Black)
Last edited by ironchef2008; 10-09-2008 at 06:21 PM. Reason: Updated wire colors to reflect actual and codes
#4
B = Black
W = White
R = Red
G = Green
L = Blue
Y = Yellow
LG = Light Green
BR = Brown
OR or O = Orange
P = Pink
PU or V (Violet) = Purple
GY or GR = Gray
SB = Sky Blue
CH = Dark Brown
DG = Dark Green
• When the wire color is striped, the base color is given first, followed by the stripe color as shown below:
Example: L/W = Blue with White Stripe
W = White
R = Red
G = Green
L = Blue
Y = Yellow
LG = Light Green
BR = Brown
OR or O = Orange
P = Pink
PU or V (Violet) = Purple
GY or GR = Gray
SB = Sky Blue
CH = Dark Brown
DG = Dark Green
• When the wire color is striped, the base color is given first, followed by the stripe color as shown below:
Example: L/W = Blue with White Stripe
#6
Registered User
iTrader: (1)
Join Date: Apr 2006
Location: Owings Mills, MD
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
So when installing just a subwoofer / amp, are these the wires that I can tap to power my amp inputs?
(23) Rear Left - (SB)(Sky Blue) **Preamp from HU
(24) Rear Left + (V)(Violet) **Preamp from HU
(25) Rear Right - (Y)(Yellow) **Preamp from HU
(26) Rear Right + (BR)(Brown) **Preamp from HU
Or will I need a special filter to tap into first, before powering my amp?
(23) Rear Left - (SB)(Sky Blue) **Preamp from HU
(24) Rear Left + (V)(Violet) **Preamp from HU
(25) Rear Right - (Y)(Yellow) **Preamp from HU
(26) Rear Right + (BR)(Brown) **Preamp from HU
Or will I need a special filter to tap into first, before powering my amp?
Trending Topics
#12
I read that there's a bit of a difference for the Sedan...obviously a different speaker setup. Does anyone have the details or a diagram for this? I'm about to do a system in mine. If not I'll see what I can diagram as I do it.
#13
I found the 08 g35 sedan wiring diagram from the service manual via InfinitiHelp.com and it looks as if it's the same as the 37's. Maybe everyone already knew that. The only real differences is that it looks like the rear door speakers in the sedan run off the same wires as the rear mids do in the coupe, so 18, 19, 31,& 32. Also since there's 1 sub, there's a B46 connector with fewer pins than the B43. The main thing to know is that the sub signal is on 1 (V-) and 2 (SB+) instead of 8 & 9. I haven't dug into the car yet so if they changed anything from 08 to 09, this could be wrong, but I doubt it. The sub amplified signal to the speaker comes from elsewhere, but that is obvious since you just follow the leads to the sub itself. Hope this helps some Sedan guys!
Last edited by groovinater23; 11-24-2009 at 02:11 PM. Reason: spelling
#15
Registered User
Join Date: Jan 2010
Location: Princeton, NJ
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
So it looks like I can just toss in my amp/sub in the back and use the current wires going to the Woofer and/or Bose Amp. If I replace the 3ways in the front, can I still leverage the Bose Amp? When I do replace the Bose amp, will I need to re-wire the entire car?