Teddy Greyson

Brad you are the man! Thank you so much for your help, I am committing to this set up!!

Coltrane1

stock? I have one

PNW_IPL

iTrader: (5)

Pmd kind sir

mdigiorgio35

So pumped to say I took the dive into new summer wheels. Thank you to all who helped through the process, this site was very helpful. Specs and pix below.

Verde Paralax 19x8.5
Michelin Pilot Super Sport 245/40/19 all the way around

Rochester

iTrader: (8)

Nice, aggressive-looking wheels. Excellent (but dirty) performance tires. Crazy wheel gap now on display.

Did you put some kind of decal on painted, non-sport brakes? Cudos for the paint, and honestly that decal is kind of attractive. But... but...

Hope you remembered that drink on the roof before you drove away.

mdigiorgio35

its a G37x sport, infiniti just decided to give the coupe the akebonos not the sedan and wanted something different. As for dirty tires, just literally had them done today and had to rush to work but don't worry they'll get a proper cleanse soon.

also i dont go anywhere without my dunks haha

Coltrane1

Forgestar CF10 in Gunmetal

2010 G37XS sedan

BBK friendly - MSRP $1659 mated w/ Nitto Invo tires

Front - 19x9 +35 245/40ZR19
Rear - 19x10 +41 275/35ZR19

Schrader 33500 TPMS "EZ Sensors" - programmable at 315/314.9/433MHz

Weight

19x9 +35 = 21.5 pds
19x10 +41 = 22.5 pds
*weights vary with offset

Supension

-F/R - Stance XR1 coilover's w/ Swift spring upgrade.
-Rear - features an installed SPC Camber kit w/ toe bolts - and a 370Z rsb

-After alignment rear camber specs are: -1.0* -0.9*
-Height G/F: 26 5/8" front - 26.75" rear

*A front camber kit will be required on this specific G37xS. It's been widely reported that with coilover installations a front camber kit varies on a per vehicle basis.

No spacers used - that determination will be made after f/camber arm installation

mdigiorgio35

^ nice look dark grey G...rims look great

blnewt

iTrader: (13)

Nice setup, glad they worked out well for you, what offsets did you end up with?

One_Deadly_G37

Work VSXX rep wheels 19x10.5 ET 22 245/35/19 all around

mdigiorgio35

thank you, as for offset im not sure (guess i should know ) but i went through a family friend who owns a tire shop

r2dmax

I'm actually looking at some Work Wheels in 19x10 ET26. Did it take any fender work to make those fit? I assume you are running serious camber though too, correct?I don't want to "stance" this car like I did before but I would love to have the wheels I saw.

Sexy 'G' by the way! minus the window banner IMO

One_Deadly_G37

I do have my rear fenders pulled since i was running a aggressive setup, I don't know how much camber i got since i haven't a alignment but its not to much but if you're not looking to stance i don't think you'll have to much camber.

Thanks the banner came from being bored lol

MaQG37

iTrader: (4)

19x10 + 26 is similar to how my 370Z touring wheels fit (19x10 + 30). Check my build thread for more pictures. It's far from "stance" but there I had roughly -2.4ish camber depending on what ride height I was at.

r2dmax

Yeah, I dont want that much. I may go ahead and pass on them