Official~Best offsets for running FAT tires!
06-29-2012, 12:27 PM
Registered User
Join Date: Nov 2011
Location: Madison, WI
Posts: 1,856
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
06-29-2012, 12:57 PM
NextLevel Performance
Join Date: Oct 2009
Location: St Paul, MN
Posts: 8,654
Quote:
Originally Posted by
Robert_K
So those are a 20x9.0 +38 & 20x10.5 +45?
That's correct
06-29-2012, 01:23 PM
Registered Member
Thread Starter
Join Date: Oct 2006
Location: Houston, Tx
Posts: 1,489
Quote:
Originally Posted by
Alpha Ice
2011 G37S
20x9.0 +38 255.35.20 -2.1
20x10.5 +45 285.30.20 -2.0
Dropped on SS-P with EDFC, front is as low as I can go. I have a 5mm spacer I'm still needing to install up front. No rubbing at all
Looks good! The front does need to come out. As I've mentioned I'm leaning towards a 20x10.5 +40 but the +45 with the 285 doesn't look bad.
06-29-2012, 03:16 PM
Registered User
Join Date: May 2007
Location: San Diego, CA
Posts: 956
GREAT Thread!
Quote:
Originally Posted by
SwissCheeseHead
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
The way you ride is raked, it looks like a panther waiting to pounce or something. So sick!
06-29-2012, 03:21 PM
Registered User
Join Date: Nov 2011
Posts: 47
Received 0 Likes
on
0 Posts
Much needed thread...
Im looking at getting MRR - GT8 Wheels 19x9.5 +38 all around (G37 Sedan), question is will 245/40/19 give me a flush fit? (what size spacers required if any?)
Stock Suspension, no camber.
Thanks and great thread once again.
06-30-2012, 08:25 AM
Registered User
Join Date: Nov 2011
Location: Madison, WI
Posts: 1,856
06-30-2012, 02:57 PM
Registered User
Join Date: Oct 2011
Posts: 312
2009 G37x
Forgestar F14s
Dropped on Eibach springs with SPC camber kits in front and rear.
Front:
20x9 +32
245/35R20
Camber -0.3 degrees
Rear:
20x10.5 +40
285/30R20
Camber ~-1.9
06-30-2012, 09:59 PM
Registered Member
Thread Starter
Join Date: Oct 2006
Location: Houston, Tx
Posts: 1,489
07-01-2012, 09:27 AM
Registered User
Join Date: Aug 2008
Posts: 1,193
245/35/20
8.5 +24
285/30/20
10.5 +45
I know you said 3 pics, but here's another shot with the original rears at +35. Could've fit with more camber.
The following users liked this post:
07-01-2012, 09:42 AM
Registered Member
Thread Starter
Join Date: Oct 2006
Location: Houston, Tx
Posts: 1,489
Look real good Mike! Suspension changes?
07-01-2012, 12:44 PM
Registered User
Join Date: Aug 2008
Posts: 1,193
Thanks.
It's on BC Coils, dropped about the same as Eibach's.
In those pics, camber is approx. -1.9 up front and -2.3 in the rear, give or take a second here and there.
Currently on 18x9.5+38 w/ 255/45s and in-spec camber. It's fairly flush IMHO, i can't even fit 265/40s on there without risking tire/fender rub.
07-01-2012, 11:09 PM
Registered Member
Join Date: Nov 2009
Location: Houston, TX
Posts: 764
Quote:
Originally Posted by
SwissCheeseHead
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
Sweet! Now I know what a 285/35 will look on the back.
07-01-2012, 11:41 PM
Registered Member
Thread Starter
Join Date: Oct 2006
Location: Houston, Tx
Posts: 1,489
Quote:
Originally Posted by
WARAT
Sweet! Now I know what a 285/35 will look on the back.
And it look MEAN!
07-02-2012, 12:00 AM
Registered Member
Join Date: Nov 2009
Location: Houston, TX
Posts: 764
Quote:
Originally Posted by
Robert_K
And it look MEAN!
+1
I should be joining this thread soon. Well.. with a 275 for now at least..
07-02-2012, 01:49 AM
Registered Member
Thread Starter
Join Date: Oct 2006
Location: Houston, Tx
Posts: 1,489
Quote:
Originally Posted by
WARAT
+1
I should be joining this thread soon. Well.. with a 275 for now at least..
Was hoping to place my order for the HREs in August but buying a house. So it is being pushed back. However I'm sold on a 255/35 & 285/30 set-up for my sedan.