When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ZSpeed Performance The Original Infiniti G37 Aluminum Engine Splash Shields!
Available for G35 G37 Sedans, Coupes, And also AWD X versions now!
The ZSpeed Infiniti G37 Aluminum Engine Splash Shields offer better cooling than the stock plastic piece.
By allowing hot air to escape out of the engine bay and out under car this offers better cooling for your engine and also much better protection from road debris!
The integrated oil change access door allows the oil and filter to be changed by simply removing 2 bolts.
The V2 version of our shield features more clearance and allows the use of deeper oil pans and oil pan spacers, These will also clear ALL sway bars including Hotchkis
do these hang lower than the stock plastic shields?
what about fitment with aftermarket bumpers?
Fitment is slightly higher than the Stock shield as it doesn't droop down in the lower section, Also it is only as low once it is past the tire contact area so it raises up with the car when you go over a speed bump ect.
The 370 shield and the G shield are very similar, I have never touched mine on anything in the 370.
Fitment with aftermarket bumpers would depend on the bumper, If the stock shield reaches it and sits about the same level it should work without issue.
11-14-2012, 03:13 PM
