Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

6MT diff install progress

Old 11-26-2014, 10:28 PM
  #91  
SharpByCoop
Registered User
 
SharpByCoop's Avatar
 
Join Date: Dec 2010
Location: Norwalk, CT
Posts: 554
Received 56 Likes on 48 Posts
BTW: I spent an hour and toggled the brake light switched. Pull one wire from it and link and run it to an on/off. Works great.

Not much worse than wasting a run wishing your hadn't cleaned residual water on the tires or didn't get them hot enough. I'm told you can pull a fuse. However, if you do that and stall it, you can't start it. Hence the toggle.

Coop
Old 11-26-2014, 10:55 PM
  #92  
Solidus
Registered Member
Thread Starter
 
Solidus's Avatar
 
Join Date: Jan 2014
Posts: 266
Received 39 Likes on 35 Posts
Originally Posted by SharpByCoop
BTW: I spent an hour and toggled the brake light switched. Pull one wire from it and link and run it to an on/off. Works great.

Not much worse than wasting a run wishing your hadn't cleaned residual water on the tires or didn't get them hot enough. I'm told you can pull a fuse. However, if you do that and stall it, you can't start it. Hence the toggle.

Coop
Yup that's the pedal burnout mod. On the Titan forum we had it down to a science. I'd rather do it from the ecm to keep the brake lights but I can knock out the pedal switch in my sleep.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SkylineG
Intake and Exhaust
13
10-03-2018 07:56 PM
91dx
Engine, Drivetrain & Forced-Induction
4
08-01-2016 10:46 PM
rpm&my_G35
Canada
6
11-07-2015 05:49 PM
cparise
G37 Coupe
2
08-19-2015 01:51 PM


Thread Tools
Search this Thread
Quick Reply: 6MT diff install progress



All times are GMT -4. The time now is 09:53 PM.