DIY: 2010-12 Non Navigation With Bose to Navigation With Bose
#46
Registered Member
iTrader: (2)
Originally Posted by ILM-NC G37S
#1) When you swapped the headunits, did you reuse your AC Amplifier (small, rectangular, white box)? You must use the amp that came with your car.
#2) Did you double check your wiring/connectors? Specifically, there are 2 connectors that are identical and can easily be mixed up. One is behind the AC Amp and the other is behind the AV headunit.
#3) The preset switch panels are not interchangeable. NAV panels can't be used on non-NAV systems and vice versa.
#4) The SRS airbag light can easily be reset. You can focus on that after you get the swap sorted.
Tomorrow AM I will fire up the iPad and check the FSM's
I do hope you are working on the electronics with the battery disconnected?
#2) Did you double check your wiring/connectors? Specifically, there are 2 connectors that are identical and can easily be mixed up. One is behind the AC Amp and the other is behind the AV headunit.
#3) The preset switch panels are not interchangeable. NAV panels can't be used on non-NAV systems and vice versa.
#4) The SRS airbag light can easily be reset. You can focus on that after you get the swap sorted.
Tomorrow AM I will fire up the iPad and check the FSM's
I do hope you are working on the electronics with the battery disconnected?
2) I checked the wiring 2-3 times. Will check again just to make sure. I'm pretty certain that I got the connectors correctly since those that go to the head unit are the one that I had to splice into the car harness and the two connectors that go to the AC Amp are grouped together
3) If the climate control panels are not interchangeable I think that might be the culprit. I hope that's the case since it's an easy fix.
Thanks for your response. I'll find a climate control panel from a NAV G and see.
#48
Registered Member
iTrader: (2)
Originally Posted by ILM-NC G37S
The switch panels look identical but the electronics are completely different between NAV and non-NAV models. Been there, made that error myself...
Just verify that the assembly is from a NAV model before purchasing.
Let us know how it turns out.
Just verify that the assembly is from a NAV model before purchasing.
Let us know how it turns out.
Thread
Thread Starter
Forum
Replies
Last Post
audiotechnica
D.I.Y. Installations/Modifications
10
09-30-2021 08:10 AM