When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
well after test fitting my old Ferrada FR3 it looks like I will be selling to purchase a different set up a little less aggressive
Current Summer wheels:
20x9 +25 (should fit fine)
20x10.5 +15 ( Looks way too aggressive, im assuming it will need fender pull and camber to fit correctly : /)
New wheel Set up will be around
20x9 or 20x9.5 +20
20x10.5 +30 or +35 (aiming for a concave look)
You could have ran a 10.5 + 15 with a smaller tire and more than likely, natural camber when you air out. I am in the process of building a 10.5 + 28-30 set to fit my air setup.
well after test fitting my old Ferrada FR3 it looks like I will be selling to purchase a different set up a little less aggressive
Current Summer wheels:
20x9 +25 (should fit fine)
20x10.5 +15 ( Looks way too aggressive, im assuming it will need fender pull and camber to fit correctly : /)
I'm a bit late to your build thread, but this is my current dilemma. I have a set of FR4's (20x10.5 +28) that I want to run. I wanted to go flush with a nice fat tire. The +28 doesn't poke as much as your +15, but it pretty much negates my flush fat tire plan. Did you manage to sell your FR3's?
02-23-2017, 09:21 PM
