Jonesmeister's Build
#152
Passed inspection! The shop couldn't give me an alignment due to my wheels. Lmao the asked if i had a lowering kit on my car! Anyway they tried to still sell me a lifetime alignment at full price, for only my front wheels.... Of course I didn't go for it.
Time to continue my search.
Time to continue my search.
#156
Jonesmeister's Build
Progress. Finishing this up today.
Diff fluid works brilliantly. The bushings are AWESOME! That cleared up the slop my shifter was having under throttle. Install sucked, but wasn't terrible.
Oh and shout out to Bosch for making a great product. In a rush, I lowered the car on my impact gun. Didn't even crack the housing! Still works as it did before!
Diff fluid works brilliantly. The bushings are AWESOME! That cleared up the slop my shifter was having under throttle. Install sucked, but wasn't terrible.
Oh and shout out to Bosch for making a great product. In a rush, I lowered the car on my impact gun. Didn't even crack the housing! Still works as it did before!
Last edited by Jonesmeister11; 07-07-2016 at 09:56 AM.
#160
Movin On!
iTrader: (13)
Missed a few of your latest replies, not sure if serious on the lowering on your impact gu, but if so, nice to hear it's up to the task, lol.
Are you getting the hail damsge repaired at a PDR shop?
Nice to hear things are running well on your coupe, keep up the nice work.
Are you getting the hail damsge repaired at a PDR shop?
Nice to hear things are running well on your coupe, keep up the nice work.
#161
Finally done with class, so re wired my escort 9500 ci. Used an add a fuse circuit.
escort matching toggle switches for the stability control defeat and the third brake light switch to do a standing burnout.
Finally installed my redline goods armrest cover. I'm not too pleased with it to be honest. While I'll be the first to admit my girlfriend's and my install is far from perfect, but my beef is with how it fits. The stitching is not straight and the fabric curve was not measured correctly. Maybe one day I'll take it to a shop for a professional to do, but as for now it will suffice.
escort matching toggle switches for the stability control defeat and the third brake light switch to do a standing burnout.
Finally installed my redline goods armrest cover. I'm not too pleased with it to be honest. While I'll be the first to admit my girlfriend's and my install is far from perfect, but my beef is with how it fits. The stitching is not straight and the fabric curve was not measured correctly. Maybe one day I'll take it to a shop for a professional to do, but as for now it will suffice.
Last edited by Jonesmeister11; 01-25-2022 at 12:47 AM.
#163
Like many, my center divide for the cup holders broke, due to me putting in a cup that was too big. Well I had some left over kydex and thought this will be a great substitute! It will flex and shouldn't break. If it does, the stuff is cheap!
I still need to polish it up a bit and round the edges, but it works!
I still need to polish it up a bit and round the edges, but it works!
#164
Changed the oil last night. Went with Moble 1 European formula (0w40) and Moble 1 10010 (whatever the physically extended filter) filter. I think I'll be purchasing a catch can next.
Dropping her off at the dealer. I think the cause of my dropping idle is due to dirty throttle bodies (59.5 k miles)
I'll also have them look at the voltage again, and figure out if I have a nail or a cracked rim. Tire is losing about 10psi every week or 2.
My grandmas Dalmatian poked a hole in the passenger seat, so looking for replacement. Probably will go with an aftermarket "racing" set of seats.
Dropping her off at the dealer. I think the cause of my dropping idle is due to dirty throttle bodies (59.5 k miles)
I'll also have them look at the voltage again, and figure out if I have a nail or a cracked rim. Tire is losing about 10psi every week or 2.
My grandmas Dalmatian poked a hole in the passenger seat, so looking for replacement. Probably will go with an aftermarket "racing" set of seats.