x2lacrosse

Have a set of wheels (18 x 8 ET 40) I want to move over from a RDX; Tire Rack Rep says they won't fit due to G (2010 x Base Sedan) having larger brakes....true or false? I know I'd need new centering rings and lug nuts/locks, but other than those, shouldn't this wheel fit?

TBau651

No clue what the brake setup/size is like on an RDX but if you have a base X Sedan you should have the small(non sport) brake kit. I guess i would be more on the surprised side if they DIDN'T fit but unfortunately can't confirm anything beyond that... why not just pop a wheel of the G and dry fit one of your new wheels?

x2lacrosse

Good idea, will give that a whirl this weekend.

Any idea what the bore size is (on G)?

TBau651

I wanna say 66.1 ??? - again, don't quote me on it.

x2lacrosse

I just found that same spec on autotk.com.
Thanks 4 your replies today.

x2lacrosse

So finally did the test fit and good to go.
Let me say I don't know much about TPMS at all. These wheels have aftermarket units on them; they're for a '11 RDX but run on same frequency as the G (315 Mhz). Will these work on the G?