malamore

Hi - Looking to replace my stock rims (they will become my winter rims). Thinking of Stance sf01 rims - 8.5 front and 9.5 rears. Specs says its +35 front and +38 rear. Any used these rims? Anyone have space issues with the big brakes that come on the 6spd, rwd S sedan?

SF01 Brush Titanium Wheel - Stance Wheels


http://cimg7.ibsrv.net/gimg/www.mbwo...84e2aaacd9.jpg

blnewt

iTrader: (13)

Those offsets will work just fine, you could even run the 9.5s all around w/ a staggered tire setup. This will assure you have the same concavity all around.

If you run the 8.5/9.5 stagger I'd go with 255/40/19 front 275/35/19 on stock suspension, or 285/35/19 rear if you are lowered or plan to lower.

If you run the 9.5 all around I'd go with either a square 255/40 or the tires I mentioned above.

If it were me I think I'd run the 9.5s all around w/ the stagered tires and this will also give you a bit more clearance at the calipers if they're close that is.

Always confirm caliper clearance w/ the vendor, Jason@Getyourwheels.com does a nice job for myG37.com members and will confirm clearance prior to purchase. He can also have those wheels custom painted if that's something you might want.