HELP~All squared setups please post here!
07-19-2016, 01:03 PM
#633
Registered Member
Originally Posted by Rr1982
What is the max width and offset 19" square setup on a stock height xs Sedan?
Now that that's clarified, I tested the rear wheels on front and the just barely hit the arms. A 5mm spacer pretty much cleared it up.
So for your question, you should be fine with 19x10+40. Since you're stock height perhaps look into a 19x9.5+35.
Personally, my next setup will be square with 275/35ZR19 all they way around on a 9.5-10" wide wheel.
07-19-2016, 01:55 PM
#634
My current setup is staggered; 19x9.5+25, 19x10.5+45 with 245/40 and 275/35. My car is on air with -1.7f and -2.1r camber.
Now that that's clarified, I tested the rear wheels on front and the just barely hit the arms. A 5mm spacer pretty much cleared it up.
So for your question, you should be fine with 19x10+40. Since you're stock height perhaps look into a 19x9.5+35.
Personally, my next setup will be square with 275/35ZR19 all they way around on a 9.5-10" wide wheel.
Now that that's clarified, I tested the rear wheels on front and the just barely hit the arms. A 5mm spacer pretty much cleared it up.
So for your question, you should be fine with 19x10+40. Since you're stock height perhaps look into a 19x9.5+35.
Personally, my next setup will be square with 275/35ZR19 all they way around on a 9.5-10" wide wheel.
07-19-2016, 04:29 PM
#635
The problem w/ stock height is the wheel poke you will get when you run a bit more aggressive but would be fine if you lower it.
Here's an example
At Stock height
https://www.myg37.com/forums/wheels-...ml#post4052416
And lowered
https://www.myg37.com/forums/wheels-...ml#post4054631
So you're either stuck w/ poke at stock height or perfect fit when lowered, or you can run a more conservative setup that won't give you the aggressive fit that you want
Here's an example
At Stock height
https://www.myg37.com/forums/wheels-...ml#post4052416
And lowered
https://www.myg37.com/forums/wheels-...ml#post4054631
So you're either stuck w/ poke at stock height or perfect fit when lowered, or you can run a more conservative setup that won't give you the aggressive fit that you want
07-19-2016, 10:31 PM
#636
The problem w/ stock height is the wheel poke you will get when you run a bit more aggressive but would be fine if you lower it.
Here's an example
At Stock height
https://www.myg37.com/forums/wheels-...ml#post4052416
And lowered
https://www.myg37.com/forums/wheels-...ml#post4054631
So you're either stuck w/ poke at stock height or perfect fit when lowered, or you can run a more conservative setup that won't give you the aggressive fit that you want
Here's an example
At Stock height
https://www.myg37.com/forums/wheels-...ml#post4052416
And lowered
https://www.myg37.com/forums/wheels-...ml#post4054631
So you're either stuck w/ poke at stock height or perfect fit when lowered, or you can run a more conservative setup that won't give you the aggressive fit that you want
07-27-2016, 01:50 AM
#639
Registered Member
08-05-2016, 12:16 AM
#641
It's funny the proportions on that pic, those wheels look HUGE, like 24s lol.
Those appear to be the base coupe 18" wheels, here's one on ebay for comparison
2008 2009 Infiniti G37 18" Wheel | eBay
Those appear to be the base coupe 18" wheels, here's one on ebay for comparison
2008 2009 Infiniti G37 18" Wheel | eBay
08-12-2016, 05:14 PM
#643
w/ spacers
w/o
08-12-2016, 05:22 PM
#644
Love the setup. I am actually looking for some winter wheels atm and I was thinking of some 18's and this setup has me in love. what size tires? I was gonna pull the trigger on some rpf1's 18x9.5 255/45 or 265/45 but not im all over the place
08-12-2016, 08:04 PM
#645
Thanks Mindows, those are 245/45/18s, but if I were to do it over I'd go w/ 255/45 or 255/40, there's enough room in front and the back even more. Depending on your offset w/ the RPFs you might even get 265/40s in there, I may try them in back when I'm ready for new tires and try a test fit in front on 265s then decide if I can run them up there too.