Help TPMS light coming on and off. Flashing and solid.
#16
#17
Registered User
Thread Starter
Join Date: Jul 2009
Location: Keyport/Old Bridge, NJ
Posts: 400
Likes: 0
Received 4 Likes
on
4 Posts
Word, LMAO! And I guess he didn't read the multiple posts of mine, including the one right above his, stating the dealer has looked at it.
Anyway, I guess I'll update this thread. I still have this problem time to time. But it only does it with the stock rims. For winter, I have the 350Z Anniversary 18's complete with a separate set of used sensors and this never happens with these wheels. I run 20mm spacers with my stock wheels, so the dealer says the problem is likely from the spacers sticking the wheels/sensors out too far! Obviously I know that's BS since the width and offset of the 350z wheels makes the sensors stick out just as far, if not a bit further, and those read fine. I don't know what the issue is. But I know if it was an issue of the sensors being out too far, then this would be a highly more reported problem on the forums.
Anyway, I guess I'll update this thread. I still have this problem time to time. But it only does it with the stock rims. For winter, I have the 350Z Anniversary 18's complete with a separate set of used sensors and this never happens with these wheels. I run 20mm spacers with my stock wheels, so the dealer says the problem is likely from the spacers sticking the wheels/sensors out too far! Obviously I know that's BS since the width and offset of the 350z wheels makes the sensors stick out just as far, if not a bit further, and those read fine. I don't know what the issue is. But I know if it was an issue of the sensors being out too far, then this would be a highly more reported problem on the forums.
Thread
Thread Starter
Forum
Replies
Last Post
superjoey
D.I.Y. Installations/Modifications
31
03-22-2023 11:56 PM
aftermarket, blinking, control, erratic, exclamation, expedition, flashing, g37, infiniti, light, mazda, panel, point, tpms, wheels