When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
want to lower my car on a budget want to go about an inch in back and a little more in front I have the tein high tech springs in mind and the toe bolt kit in my shopping cart right now does anyone have experience with these I don't want to go more than 1.25 inches in back as I'm running 285/30/20 in back and don't want too much trouble running scraping anyone have any recommendations for me?? Please help!!
Think I'm gonna have to roll my fender out?
That's a good choice, will be a more sport oriented suspension. As far as the 285s, depends on your wheel offset. I was running 295s on a 10 +45 at -1.0 camber and had no issues.
You might also need another pair of bolts for your oem camber arms to give you more adjustment, should be able to get your camber & toe in spec and only cost another $30 if you have a dremel to do the DIY install.
That's a good choice, will be a more sport oriented suspension. As far as the 285s, depends on your wheel offset. I was running 295s on a 10 +45 at -1.0 camber and had no issues.
You might also need another pair of bolts for your oem camber arms to give you more adjustment, should be able to get your camber & toe in spec and only cost another $30 if you have a dremel to do the DIY install.
02-10-2017, 06:44 PM
