Review Z1 Motorsports Brake Master Cylinder Brace
#1
Z1 Motorsports Brake Master Cylinder Brace
I picked this up after confirming it would fit the G chassis. I have stock Akebono breaks, SS lines, and Z1 two piece rotors on all four corners. The car already did fairly well at braking in both daily situations and tracked. I did notice the firewall flex a little. The brace definitely gave a firmer feel to the pedal. Not talking insane change, but it was noticeable firming up of the pedal.
I didn't install it myself as I was at Z1 and they offer too while I was having my FUCAs looked at, but looking at it installed I would imagine it will give people with big hands or not a huge collection of tools a good session of cussing.
Overall I would highly recommend it to those that want a solid brake feel and round out having a good brake setup.
I didn't install it myself as I was at Z1 and they offer too while I was having my FUCAs looked at, but looking at it installed I would imagine it will give people with big hands or not a huge collection of tools a good session of cussing.
Overall I would highly recommend it to those that want a solid brake feel and round out having a good brake setup.
Last edited by zer099; 08-26-2016 at 12:46 PM. Reason: fixed wording
The following users liked this post:
j50ny (09-09-2016)
Trending Topics
#9
Registered Member
#11
Registered Member
However, due to my hands being a normal size, the compartment of the brace, the location of the hard lines coming off the master cylinder, the orientation of the bolts holding the brace to the car, and not having every possible tool available to me, is making the installation difficult.
The following users liked this post:
jpowersjr2 (10-20-2016)
The following users liked this post:
abrecos (11-26-2020)