Blue Batmobile Overlay Thread. Post your pics here!
.
.
The following users liked this post:
Blue_Batmobile (01-09-2015)
The following users liked this post:
Blue_Batmobile (01-09-2015)
The following 2 users liked this post by Todd Potempa:
Blue_Batmobile (01-18-2015),
DYT-350Z (02-04-2015)
01-14-2015, 03:05 PM
#502
Registered User
Picked up (thanks Andy 
) and installed the 6/10 (20% tint) GTR style overlays for my front and rear lights. Never worked with vinyl before but finally got the hang of it after a few hours of frustration 
...heat-stretching is your friend! Still have a couple noticeable bubbles here and there though.
By far and away the easiest way to install the vinyls was to first remove the headlight and tail light assemblies - there are a few DIYs here on how to do that.
Apologies for the crappy iPhone photos
) and installed the 6/10 (20% tint) GTR style overlays for my front and rear lights. Never worked with vinyl before but finally got the hang of it after a few hours of frustration ...heat-stretching is your friend! Still have a couple noticeable bubbles here and there though.By far and away the easiest way to install the vinyls was to first remove the headlight and tail light assemblies - there are a few DIYs here on how to do that.
Apologies for the crappy iPhone photos
The following users liked this post:
Blue_Batmobile (01-18-2015)
01-17-2015, 07:22 AM
#505
Registered User
Picked up (thanks Andy ) and installed the 6/10 (20% tint) GTR style overlays for my front and rear lights. Never worked with vinyl before but finally got the hang of it after a few hours of frustration ...heat-stretching is your friend! Still have a couple noticeable bubbles here and there though.
By far and away the easiest way to install the vinyls was to first remove the headlight and tail light assemblies - there are a few DIYs here on how to do that.
Apologies for the crappy iPhone photos
) and installed the 6/10 (20% tint) GTR style overlays for my front and rear lights. Never worked with vinyl before but finally got the hang of it after a few hours of frustration ...heat-stretching is your friend! Still have a couple noticeable bubbles here and there though.By far and away the easiest way to install the vinyls was to first remove the headlight and tail light assemblies - there are a few DIYs here on how to do that.
Apologies for the crappy iPhone photos
01-22-2015, 10:43 PM
#506
The following users liked this post:
Blue_Batmobile (01-22-2015)
01-22-2015, 11:59 PM
#507
The following users liked this post:
Blue_Batmobile (02-01-2015)
02-06-2015, 12:42 AM
#510
Join me on facebook, and receive 15% off your Overlay order!
https://www.facebook.com/groups/bluebatoverlays/
Offer good through Februrary 28, 2014.
B@t™
https://www.facebook.com/groups/bluebatoverlays/
Offer good through Februrary 28, 2014.
B@t™
